BOSCH REXROTH
R060205010

$308.76 USD

BOSCH REXROTH
Material:R060205010
Model:KBM-50-DD

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth STD.LINEAR BUSHING KBM-50-DD (R060205010) is a high-quality standard linear bushing designed to provide smooth and precise linear motion in various applications. This robust component features a closed design with a rugged all-metal construction, including a steel ball retainer, which makes it suitable for harsh environments and heavy contamination such as those found in woodworking, foundries, and cement plants. With its many pockets acting as lubricant reservoirs, the KBM-50-DD offers extended lubrication intervals or even lubrication for life, ensuring reliable operation with minimal maintenance. The pockets also serve to collect dirt and debris, preventing jamming of the bushing. The product comes equipped with two seals and integrated steel retaining rings that allow for higher operating temperatures on shaft diameters of 50mm and above. The outer sleeve of the KBM-50-DD is hardened and ground to ensure durability and performance. It supports dynamic load capacities based on a total travel of 100 km but can be adjusted for longer travels. With maximum acceleration (amax) specifications provided, users can anticipate the performance capabilities under various conditions. This linear bushing's rows of balls are made from rolling bearing steel, ensuring smooth motion and high load capacities. The friction coefficient values are optimized for use when lubricated with oil, although they may vary under different load conditions. Additionally, this model can operate within an ambient temperature range from -30°C to +80°C without wiper seals. Weighing in at 0.5 kg, the KBM-50-DD is designed to be easily integrated into existing systems while providing reliable linear guidance. It stands out due to its ability to withstand challenging industrial environments while maintaining precision in linear movements.

Standard LB, closed, 50, with two seals

Standard linear bushing
Standard (metal)
Closed
Shaft diameter d = 50
With two seals
Version: Standard

Unpacked Weight: 1.029 kg

Rugged all-metal design with steel ball retainer for harsh environments and heavy contamination
Many pockets acting as lubricant reservoirs for extended lubrication intervals or lubrication for life
Steel ball retainer (shaft diameters 3, 4 and 10 with plastic strip made of POM and shaft diameters 5 and 8 made of PA)
Closed, for self-supporting shafts
Balls made of rolling bearing steel
For use in woodworking, foundries, cement plants
Pockets collect any dirt that may have worked its way in to prevent the linear bushing from jamming.
No wiper seals, come with integrated steel retaining rings; higher temperatures allowed with shaft diameters 12 and higher
Hardened and ground outer sleeve

Data Sheet	Download Data Sheet
2D CAD	Download 2D CAD
2D CAD	Download 2D CAD
3D CAD	Download 3D CAD
3D CAD	Download 3D CAD
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual

Rows of balls	6
Footnote shaft radial clearance h6	Determined from working bore diameter and shaft tolerance statistics. Recommended housing bore tolerance: H6 or H7.
Series	Standard (metal)
Footnote friction force FR	One wiper seal: Multiply value with factor 0.5
Size C1 H13	77.3
Maximum dynamic load capacity Cmax	8740
Footnote permissible ambient temperature (min ... max)	Higher temperatures are only admissible at linear bushings without wiper seals with ball retainers made of steel. Make allowance for reductions in load capacity.
Max. acceleration amax	50
Footnote friction coefficient μ	Friction coefficients of unsealed linear bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load.
Permissible ambient temperature	-10 °C ... +80 °C
Outer diameter D	75
Breakaway force	30
Maximum permissible linear speed vmax	2
Size D	75
Size D1	71
Friction coefficient μ	0,001 ... 0,004
Size C h12	100
Size C2	2.65
Friction coefficient μ max.	0.004
Friction force	10
Footnote minimum dynamic load capacity Cmin	The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26.
Friction coefficient μ min.	0.001
Footnote maximum dynamic load capacity Cmax	The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26.
Productgroup ID	17
Permissible ambient temperature (max)	+80
Permissible ambient temperature (min)	-10
Friction force FR footnote 2	Frictional drags generated by linear bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication.
Footnote breakaway force	One wiper seal: Multiply value with factor 0.5
Minimum static load capacity C0min	6470
Maximum static load capacity C0max	8280
Minimum dynamic load capacity Cmin	8260
Shaft diameter d	50
Linear guide type	Linear bushing and shaft
Filter for linear bushings and shafts	Linear bushings
Format of linear bushings	– Closed
Footnote minimum static load capacity C0min
Footnote maximum static load capacity C0max
Weight	1.029
Size D1 with tolerance	71 mm

General technical data

Ø d	mm	3	4	5	8	10	12	16	20	25	30	40	50	60	80
amax	m/s²	100											50
vmax	m/s	2.5											2
m	kg	0.001	0.002	0.01	0.02	0.03	0.04	0.05	0.1	0.19	0.32	0.62	1.14	2.11	4.7
FR	N	-		0.4 1) 2)	0.5 1) 2)	1 1) 2)	2 1) 2)	3 1) 2)	4 1) 2)	5 1) 2)	6 1) 2)	8 1) 2)	10 1) 2)	12 1) 2)	15 1) 2)
Breakaway force	N	-		0.8 1)	1 1)	2 1)	6 1)	9 1)	12 1)	14 1)	18 1)	24 1)	30 1)	36 1)	45 1)
μ 3)		0.001 ... 0.004
Rows of balls		4							5		6
Working bore diameter tolerance	µm	+ 8 0		+ 11 + 1	+ 12 + 2	+ 8 0	+ 12 + 2	+ 14 + 2		+ 16 + 2		+ 19 + 2			+ 24 + 2
Shaft radial clearance h6 4)	µm	+ 12 + 2	+ 14 + 2	+ 16 + 4	+ 18 + 5		+ 20 + 5	+ 22 + 5	+ 23 + 6	+ 25 + 6		+ 30 + 7		+ 33 + 7	+ 37 + 8
Operating conditions
Permissible ambient temperature (min ... max) 5)		-10 °C ... +80 °C

1)	One wiper seal: Multiply by a factor of 0.5.
2)	Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication.
3)	Friction coefficients of unsealed Linear Bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load.
4)	Determined from working bore diameter and shaft tolerance statistics. Recommended housing bore tolerance: H6 or H7.
5)	Only unsealed Linear Bushings with steel ball retainers may be used at higher temperatures. Make allowance for reductions in load capacity.

Load capacities and load moments

Ød	mm	3	4	5	8	10	12	16	20	25	30	40	50	60	80
Cmin	N	55	70	180	320	300	420	580	1170	2080	2820	5170	8260	11500	21000
Cmax	N	65	80	210	370	350	480	670	1390	2480	2980	5480	8740	12100	22200
C0min	N	45	60	140	240	260	280	440	860	1560	2230	3810	6470	9160	16300
C0max	N	65	85	200	330	370	400	620	1250	2280	2860	4880	8280	11730	20850

	The load ratings are based on a total travel of 100, 00 m. When based on 50 000 m, the values in the table need to be multiplied by 1.26.

Legend

Symbol	Description	Unit
Ød	Shaft diameters	mm
amax	Maximum acceleration travel	m/s2
Cmax	Maximum dynamic load rating	N
Cmin	Minimum dynamic load rating	N
C0max	Maximum static load rating	N
C0min	Minimum static load rating	N
FR	Friction force	N
m	Mass	kg
vmax	Maximum permissible speed	m/s
μ	Friction coefficient

Impact of load direction on load rating of closed Linear Bushings

The listed load ratings should be chosen depending on installation in minimum or maximum position and should be based on the calculations. If the load direction is clearly defined and the Linear Bushings can be installed in maximum position, the load ratings Cmax. (dynamic load rating) and C0 max (static load rating) can be used. If aligned installation is not possible or the load direction is not defined, the minimum load ratings must be used.

technical illustration-R060205010-Standard LB, closed, 50, with two seals

Definition of dynamic load ratings

Installation dimensions/interchangeability

Standard Linear Bushings have the same installation dimensions as super Linear Bushings. They are interchangeable, differ however in terms of securing, radial clearance, load ratings and lubrication.

Sealing

Standard Linear Bushings come with a wiper seal with shaft diameters of 5 and higher. Open standard Linear Bushings with shaft diameters 20 to 80 can also come fully sealed (with longitudinal seal; increased friction).

Dimensions

Ød		mm	3	4	5	8	10	12	16	20	25	30	40	50	60	80
D		mm	7	8	12	16	19	22	26	32	40	47	62	75	90	120
C	h12	mm	10	12	22	25	29	32	36	45	58	68	80	100	125	165
C1	H13	mm	-		14.2	16.2	21.6	22.6	24.6	31.2	43.7	51.7	60.3	77.3	101.3	133.3
C2		mm	-		1.1		1.3			1.6	1.85		2.15	2.65	3.15	4.15
D1		mm	-		11.1	14.7	18	20.5	24.9	30.5	38.5	44.5	58	71	85	114

Life expectancy calculation

General mounting instructions

Customer-built housings

Initial lubrication

Linear bushings do not come with initial lubrication. Grease the Linear Bushings before use. Service life data is based on initial lubrication and relubricated Linear Bushings.