BOSCH REXROTH
3842998808
- BOSCH REXROTH
- Material:3842998808
Due to extremely high demand, please call 800-887-4183 for availability
The Bosch Rexroth DIVERTER DI 5/H-3W (3842998808) is a high-quality three-way diverter module designed for efficient branching off or combining workpiece pallets in material handling systems. This ready-for-operation unit boasts a reversible operation feature and is specifically engineered to be controlled by a pneumatic cylinder operating at a pressure range, ensuring reliable and precise direction changes. The diverter's support profile is constructed from durable anodized aluminum, while the lateral guide profile can be made of steel, polymer, or aluminum, also supported by anodized aluminum for longevity and consistent performance. The Bosch Rexroth DIVERTER DI 5/H-3W is equipped with bevel gears made of sintered metal that are driven via a king shaft, allowing for smooth and dependable operation. It has been designed with full rollers that can handle loads up to a specified weight at certain conveyor speeds. For ease of integration into existing systems, it features a standard pneumatic push-in fitting size. This module is highly adaptable as the king shaft installation can be positioned on either side of the main or secondary section according to the system's requirements. It also offers direct position sensing on the diverter arm and bolt upon request for enhanced control. However, it's important to note that this diverter is not intended for accumulation operation and has specific limits regarding permissible loads and gravity center positions. The DIVERTER DI 5/H-3W comes ready-to-install with optional protective covers available for added safety. The number of rollers included in this model ensures effective transfer of workpiece pallets within the system. Its design allows for easy setup of curves, diverters, and junctions within transport systems while maintaining operational integrity even with changes in direction.
Three-way diverter DI 5/H-3W
Unpacked Weight: 0 kg
With the illustrated gravity center position transport problems may occur at the transition from the secondary section to the main section.
Note:
For bWT = 650 mm and gravity center position 1/6, eccentric, mG = max. 200 kg
Limits for the permissible gravity center position for the three-way diverter
Set up of curves, diverters, junctions
| The three-way diverter is a ready-for-operation module for branching off workpiece pallets in two directions or combining from two directions. |
| The king shaft installation for the main or secondary section can be installed on either side |
| The diverter is controlled as an active element via a pneumatic cylinder (p = 5 - 6 bar) |
| Note: The three-way diverter is not suitable for accumulation operation. For permissible loads, see table (under order details).: Note: The three-way diverter is not suitable for accumulation operation. For permissible loads, see table (under order details). |
| Reversible operation possible |
| Accumulation operation not permitted |
| Support profile made of anodized aluminum |
| Lateral guide profile made of steel, polymer, or aluminum in an anodized aluminum support |
| Driven via king shaft with bevel gears made of sintered metal |
| Roller spacing p = 130 |
| Full rollers |
| mG Up to 300 kg (at v = 9 m/min): mG Up to 300 kg (at v = 9 m/min) |
| Pneumatic push-in fitting: 6 mm |
| Direct position sensing on the diverter arm and the bolt upon request |
| Data Sheet | Download Data Sheet |
| 3D CAD | Download 3D CAD |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Productgroup ID | 2 |
| Number of rollers [N] | 13; 15; 17 |
| Weight | 0 |
| Notice | l1 = length of main section,l2 = length of secondary section,l3 = length of secondary section up to center of main section,l4 = length of secondary section and width of main section |
| Delivery information | Ready-to-install,Optional: Protective covers mounted (protective covers cannot be ordered separately) |
| Required accessories | Limit switch for linear cylinder |
| Length of secondary section up to center of main section [l3] | 650,780,910 |
| Length of secondary section [l2] | 382.5,415,447 |
| Track width [b] | 455,650,845 |
| Workpiece pallet length [lWT] | 455,650,845,1040 |
| Track width in direction of transport [b] | 455,650,845 |
| Length of secondary section and width of main section [l4] | 917.5,1145,1372.5 |
| Length of main section [l1] | 1300,1560,1820 |
| Number of rollers [N] | 13,15,17 |
| King shaft installation on main section [DSM] | 1; 2 |
| 1) | Outlet |
| 2) | Inlet |
| 3) | Transport height difference between main and secondary section |
|
S5 |
= |
Diverter closed |
|
S6 |
= |
Diverter open |
|
S7 |
= |
Top |
|
S8 |
= |
Bottom |
|
S9 |
= |
Top |
|
S10 |
= |
Bottom |
|
A1/A2 |
= |
0 = branch off |
|
|
|
1 = straight ahead |
|
A3 |
= |
0 = right |
|
|
|
1 = left |
|
Y1, Y5, Y6 |
= |
Stop gate (Z1, Z5, Z6) |
|
Y2.1 |
= |
Open |
|
Y2.2 |
= |
Closed |
|
Y3.1 |
= |
Top |
|
Y3.2 |
= |
Bottom |
|
Y4.1 |
= |
Top |
|
Y4.2 |
= |
Bottom |
|
M1 |
= |
0 = right |
|
|
|
1 = left |
|
M2 |
= |
0 = down |
|
|
|
1 = up |
Three-way diverter DI 5/XH-3W, DI 5/H-3W
|
b1) (mm) |
lWT2) (mm) |
N |
l13) (mm) |
l24) (mm) |
l35) (mm) |
l4 (mm) |
|
455 |
455; 650 |
13 |
1300 |
382,5 |
650 |
917,5 |
|
650 |
650; 845 |
15 |
1560 |
415 |
780 |
1145 |
|
845 |
845; 1040 |
17 |
1820 |
447 |
910 |
1372,5 |
| 1) | b = track width in direction of transport |
| 2) | lWT = workpiece pallet length (in direction of transport) |
| 3) | l1 = length of the main section |
| 4) | l2 = length of the secondary section |
| 5) | l3 = length of secondary section up to center of main section |
Permissible gravity center position
In order to absorb acceleration forces without any problems when separating and changing the direction of the pallets (in curves, when changing to transverse conveyors), the location of the load center position on the workpiece pallet must be noted.
Generally we recommend that:
the load should be positioned in the center of the workpiece pallet the load center positionS should not exceed 1/3 bWT (with bWT ≤ lWT) in height
Condition of Delivery
| Three-way diverter DI 5/XH-3W | Ready-to-install | Optional: Protective covers mounted (protective covers cannot be ordered separately) |
| Three-way diverter DI 5/H-3W |