BOSCH REXROTH
3842998539
$3,085.08 USD
- BOSCH REXROTH
- Material:3842998539
Quantity in stock: 0
Belt section CSS/B-4
Unpacked Weight: 0 kg
| Minor corrections of the end position of the solar modules on the belt section possible |
| Most cost-effective solution |
| Longitudinal conveyor for glass modules of various dimensions |
| Longitudinal conveyor for wafer trays |
| Not intended for accumulation operation |
| Belt section consisting of two to five tracks for secure support of the glass modules across the entire width. Distance between the tracks can be determined individually (b1 to b4) |
| Permissible load: ‒ Per track: max. 0.15 kg/cm support surface length and max. 60 kg ‒ Per belt section: max. 120 kg: Permissible load: ‒ Per track: max. 0.15 kg/cm support surface length and max. 60 kg ‒ Per belt section: max. 120 kg |
| Suitable for reversible operation (up to 3000 mm) |
| Conveyor medium: Special textile toothed belt. Due to the low friction coefficient in relation to the workpiece, particularly well suited for lateral positioning procedures |
| Simple exchange of the toothed belts by dismantling from above without realignment |
| Gear motors are suitable for operation with frequency converter |
| Motor mounting on right (MA = R) or left (MA = L) possible on each track of the belt section (MS = 1 ... 5; MS = 1 denotes the left track in the direction of transport). When mounting the motor between the tracks, observe a minimum distance of 165 mm (b1 to b4) |
| Motor mounting outside: suspended or lying down; Motor mounting between the tracks: suspended: Motor mounting outside: suspended or lying down; Motor mounting between the tracks: suspended |
| Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K) |
| Version with lateral guide (FP = 1) preferably for fully framed glass modules; version without lateral guide (FP = 0) preferably for unprocessed glass modules with rough edges |
| Suitable for use in cleanroom environments up to cleanroom class 6 in accordance with ISO 14644-1 |
| Data Sheet | Download Data Sheet |
| 3D CAD | Download 3D CAD |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Track width [b1 max] | 1000 |
| Track width in direction of transport [b max] | 3000 |
| Track width [b2 min] | 85 |
| Track width in direction of transport [b min] | 160 |
| Track width [b2 max] | 1000 |
| Productgroup ID | 2 |
| Section load in accumulation operation | 120 |
| Track width [b1 min] | 85 |
| Length min [L min] | 6000 |
| Length max [l max] | 290 |
| ESD | yes |
| Track width [b3 max] | 1000 |
| Track width [b4 max] | 1000 |
| Track width [b3 min] | 85 |
| Tracks | 4 |
| Track width [b4 min] | 85 |
| Weight | 0 |
| Notice | bxmin = 165 mm for motor mounting between the tracks,For bmin, the distance dimension with the highest index is determined |
| Delivery information | b ≤ 2000 mm: Assembled b > 2000 mm: Partially assembled,Motor included separately |
| Recommended accessories | Frames SFS,Leg set SZS/B,Frequency converter FU |
