BOSCH REXROTH
3842547148
$1,044.55 USD
- BOSCH REXROTH
- Material:3842547148
- Model:CURVE 160+ VERT STS 15
Quantity in stock: 0
The Bosch Rexroth CURVE 160+ VERT STS 15?R500 (3842547148) is a meticulously designed vertical curve component for conveyor systems, specifically tailored for the STS VFplus line. This model is engineered to facilitate smooth transitions from horizontal to vertical conveying paths and vice versa, accommodating a deflection angle that enhances operational flexibility within material handling setups. The product comes with an effective sliding rail length and an actual chain length, both of which are integral to its performance. The weight of the unit is also specified, ensuring users can plan for appropriate load capacities. This CURVE model is supplied fully assembled, including fastening materials for easy mounting onto STS section profiles. It requires slide rails for operation, with the length calculation dependent on the size 'b' and dimension 'A'. The construction of this vertical curve boasts nonrusting steel in its profile, connector, and support profile from size onwards, ensuring durability and longevity even in demanding environments. The CURVE 160+ VERT STS 15?R500 is versatile enough to handle all deflection angles and radii while being compatible with any chain type used within the system. It's designed for use with either Advanced or Premium slide rails, which must be selected based on specific application requirements. This component is particularly recommended for use at the infeed and outfeed points of wedge conveyors dealing with small products due to its ability to increase chain tensile force through friction during elevation changes. Its open section profile version further adds to its applicability across various conveyor configurations.
Vertical curve STS VFplus 160 15°
Unpacked Weight: 2.594 kg
The vertical curve is used for the transition from a horizontal conveyor section to an ascending section and vice versa. The chain tensile force is increased through the ensuing friction.
A vertical curve of 5° is recommended for the infeed and outfeed on the wedge conveyor, especially with small products.
Size: all Deflection angles and radii Suitable chain types: all Version with open section profiles Requires the use of the Advanced or Premium slide rails| Data Sheet | Download Data Sheet |
| 3D CAD | Download 3D CAD |
| Deflection angle [α] | 15 |
| Productgroup ID | 2 |
| Effective sliding rail length | 8x 0,33 |
| Actual chain length | 2x 0,33 |
| Weight | 2.594 |
| Notice | Effective sliding rail length with support profile |
| Scope of delivery | Incl. fastening material for mounting to STS section profiles |
| Delivery information | Fully assembled |
| Required accessories | Slide rail: Length calculation |
| Size [b] | 160 |
| Dimension [A] | 334.9 |
| Material information | Profile: Non-rusting steel 1.4301,Connector: Non-rusting steel 1.4301,Support profile from size 160: Non-rusting steel 1.4301 |
Combination matrix
|
Straight |
Curves |
Drives |
Return Unit |
|||||||||
|
Section profile STS open |
Section profile STS Clean |
Assembly module |
Curve wheel |
Roller curve* |
Vertical curve |
Head drive |
Connection drive |
Center drive** |
Basic unit |
90° ** |
||
|
Straight |
Section profile STS open |
J |
||||||||||
|
Section profile STS Clean |
L6) |
L6) |
||||||||||
|
Assembly module |
J |
L6) |
N |
|||||||||
|
Curves |
Curve wheel |
J |
L6) |
J |
L2, 7) |
|||||||
|
Roller curve* |
J |
N |
J |
N |
L1) |
|||||||
|
Vertical curve |
J |
L6) |
J |
L1) |
L1) |
L1) |
||||||
|
Drives |
Head drive |
J |
L6) |
J |
L1) |
L1, 4) |
L1, 4) |
N |
||||
|
Connection drive |
J |
L6) |
J |
L1) |
N |
L1) |
N |
N |
||||
|
Center drive** |
J |
L6) |
J |
L1) |
N |
L1) |
N |
N |
N |
|||
|
Return Unit |
Basic unit |
J |
L6) |
J |
L1) |
L1, 4) |
L1, 4) |
L1) |
L1) |
L1, 3) |
L1, 3) |
|
|
90° ** |
J |
L6) |
J |
L1) |
N |
L1) |
L1) |
L1) |
N |
N |
L1) |
|
|
J |
possible without restrictions |
* Support profile must project 76+2 mm into the roller curve. |
||||||||||
|
L |
possible with restrictions |
** AL-STS adapter included in the scope of delivery. |
||||||||||
|
N |
not possible |
|||||||||||
| 1) | Profile connector not required |
| 2) | Use of a profile piece (Lmin = 224 mm) |
| 3) | Assembly module required |
| 4) | For sizes 160-320: shorten the support rail on the dotted line |
| 5) | Use of the AL-STS adapter |
| 6) | Replace the standard profile connector with STS Clean Section profile connector |
| 7) | Directly possible with left-right change (one profile connector is no longer required) |
Vertical curve STS
Vertical curve STS VFplus 5°
Vertical curve STS VFplus 15°
Vertical curve STS VFplus 30°
Vertical curve STS VFplus 45°
|
b |
α |
A |
C |
R |
|
mm |
° |
mm |
mm |
mm |
| 65 | 5 | 246.2 | 79.5 | 500 |
| 15 | 334.9 | 110.7 | 500 | |
| 30 | 453.9 | 181.4 | 500 | |
| 45 | 548.7 | 276.1 | 500 | |
| 90 | 5 | 246.2 | 79.5 | 500 |
| 15 | 334.9 | 110.7 | 500 | |
| 30 | 453.9 | 181.4 | 500 | |
| 45 | 548.7 | 276.1 | 500 | |
| 120 | 5 | 246.2 | 79.5 | 500 |
| 15 | 334.9 | 110.7 | 500 | |
| 30 | 453.9 | 181.4 | 500 | |
| 45 | 548.7 | 276.1 | 500 | |
| 160 | 5 | 246.2 | 79.5 | 500 |
| 15 | 334.9 | 110.7 | 500 | |
| 30 | 453.9 | 181.4 | 500 | |
| 45 | 548.7 | 276.1 | 500 | |
| 240 | 5 | 246.2 | 79.5 | 500 |
| 15 | 334.9 | 110.7 | 500 | |
| 30 | 453.9 | 181.4 | 500 | |
| 320 | 5 | 246.2 | 79.5 | 500 |
| 15 | 334.9 | 110.7 | 500 | |
| 30 | 453.9 | 181.4 | 500 |
Slide rail
Slide rail
Easy assembly - simply clip onto the section profile Secured against axial shifting due to lateral boltingCAD data