BOSCH REXROTH
3842547111
$773.41 USD
- BOSCH REXROTH
- Material:3842547111
- Model:CAM WHEEL 65+ STS 30
Quantity in stock: 0
The Bosch Rexroth CAM WHEEL (3842547111) is a meticulously engineered component designed to facilitate smooth and efficient directional changes in conveyor systems. This curve wheel is part of the STS VFplus product range and is notable for its easy-to-clean design, which lends itself well to applications requiring stringent hygiene standards. The wheel incorporates ball bearings made from non-rusting steel, complete with seals on both sides and filled with FDA-compliant grease, ensuring durability and compliance with food safety regulations. Constructed to avoid any interfering contours above the chain plate height, the CAM WHEEL 65+ STS 30° allows for seamless integration into conveyor setups without impeding the movement of goods. It can operate both horizontally and vertically, making it versatile for use in wedge conveyors and suitable for various deflection angles. The surfaces that come into contact with the chain are made from FDA-compliant materials, underscoring its suitability for industries where contamination must be strictly controlled. The CAM WHEEL boasts a robust housing crafted from non-rusting steel and a chain wheel made from white PA (polyamide), ensuring longevity and resistance to wear. Its effective sliding rail length facilitates low-friction direction changes even at very small radii, enhancing conveyor efficiency. The product comes fully assembled including the necessary fastening material for mounting to STS section profiles. Additional versions of this product can be requested through Bosch Rexroth's modification department, allowing customization to meet specific application needs. With its combination of FDA-compliant construction, versatile application potential, and robust design, the Bosch Rexroth CAM WHEEL 65+ STS 30° is an essential component in modern conveyor systems where reliability and hygiene are paramount.
Curve wheel STS VFplus 65 30°
Unpacked Weight: 4.2 kg
The curve wheel is used for the horizontal change in direction of the chain. It enables low-friction direction changes with very small radii.
Size: 65, 90, 120 For deflection angles, see table Other deflection angles on request Suitable chain types: all| Easy-to-clean design |
| Ball bearing made of non-rusting steel (1.4301), with seal on both sides and FDA-compliant grease filling |
| Surfaces in contact with chain made of FDA-compliant materials |
| No interfering contours above chain plate height |
| Can be used horizontally and vertically (for wedge conveyors) |
| Data Sheet | Download Data Sheet |
| 3D CAD | Download 3D CAD |
| Deflection angle [α] | 30 |
| Productgroup ID | 2 |
| Effective sliding rail length | 2x 0,34 |
| Actual chain length | 2x 0,28 |
| Modification | Additional versions are available on request from our modification department. (COS@boschrexroth.de) |
| Weight | 4.2 |
| Scope of delivery | Incl. fastening material for mounting to STS section profiles |
| Delivery information | Fully assembled |
| Size [b] | 65 |
| Dimension [A] | 185.5 |
| Material information | Housing: Non-rusting steel 1.4301,Chain wheel: PA, white,Ball bearing: Non-rusting steel 1.4301/FDA |
Combination matrix
|
Straight |
Curves |
Drives |
Return Unit |
|||||||||
|
Section profile STS open |
Section profile STS Clean |
Assembly module |
Curve wheel |
Roller curve* |
Vertical curve |
Head drive |
Connection drive |
Center drive** |
Basic unit |
90° ** |
||
|
Straight |
Section profile STS open |
J |
||||||||||
|
Section profile STS Clean |
L6) |
L6) |
||||||||||
|
Assembly module |
J |
L6) |
N |
|||||||||
|
Curves |
Curve wheel |
J |
L6) |
J |
L2, 7) |
|||||||
|
Roller curve* |
J |
N |
J |
N |
L1) |
|||||||
|
Vertical curve |
J |
L6) |
J |
L1) |
L1) |
L1) |
||||||
|
Drives |
Head drive |
J |
L6) |
J |
L1) |
L1, 4) |
L1, 4) |
N |
||||
|
Connection drive |
J |
L6) |
J |
L1) |
N |
L1) |
N |
N |
||||
|
Center drive** |
J |
L6) |
J |
L1) |
N |
L1) |
N |
N |
N |
|||
|
Return Unit |
Basic unit |
J |
L6) |
J |
L1) |
L1, 4) |
L1, 4) |
L1) |
L1) |
L1, 3) |
L1, 3) |
|
|
90° ** |
J |
L6) |
J |
L1) |
N |
L1) |
L1) |
L1) |
N |
N |
L1) |
|
|
J |
possible without restrictions |
* Support profile must project 76+2 mm into the roller curve. |
||||||||||
|
L |
possible with restrictions |
** AL-STS adapter included in the scope of delivery. |
||||||||||
|
N |
not possible |
|||||||||||
| 1) | Profile connector not required |
| 2) | Use of a profile piece (Lmin = 224 mm) |
| 3) | Assembly module required |
| 4) | For sizes 160-320: shorten the support rail on the dotted line |
| 5) | Use of the AL-STS adapter |
| 6) | Replace the standard profile connector with STS Clean Section profile connector |
| 7) | Directly possible with left-right change (one profile connector is no longer required) |
Curve wheel STS
Curve wheel STS VFplus 30°
Curve wheel STS VFplus 45°
Curve wheel AL VFplus 90°
Curve wheel STS VFplus 180°
|
b |
α |
A |
B |
C |
R |
|
mm |
° |
mm |
mm |
mm |
mm |
| 65 | 30 | 185.5 | 322.5 | 279.4 | 153 |
| 45 | 185.5 | 322.5 | 301.9 | 153 | |
| 90 | 185.5 | 322.5 | 285.5 | 153 | |
| 180 | 185.5 | 287.5 | 153 | ||
| 90 | 30 | 210.5 | 347.5 | 291.9 | 165.5 |
| 45 | 210.5 | 347.5 | 319.6 | 165.5 | |
| 90 | 210.5 | 347.5 | 310.5 | 165.5 | |
| 180 | 210.5 | 310.5 | 165.5 | ||
| 120 | 30 | 240.5 | 377.5 | 306.9 | 180.5 |
| 45 | 240.5 | 377.5 | 340.8 | 180.5 | |
| 90 | 240.5 | 377.5 | 340.5 | 180.5 | |
| 180 | 240.5 | 340.5 | 180.5 |
Note: High-pressure cleaning of the ball bearings is not permitted.