BOSCH REXROTH
3842545690
$254.86 USD
- BOSCH REXROTH
- Material:3842545690
- Model:STOP SHEET 455 195
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth STOP SHEET (3842545690) is a specialized component designed to enhance the safety and functionality of conveyor systems. This product is a protective cover that can be used in various parts of the conveyor, including curves, diverters, junctions, and particularly at the ends where the STXH and STH end plates are located. The STOP SHEET is engineered to be easily clipped between rollers using spring elements, ensuring a secure fit without the need for complex installation procedures. This model is crafted from galvanized steel, offering durability and resistance to wear in demanding industrial environments. It has been designed with flexibility in mind, providing compatibility with different widths and roller spacings. The product includes special covers that can be applied to the center sections of conveyors as well as transitions and ends, thereby catering to a wide range of conveyor configurations. Additionally, the STOP SHEET comes with end plates for both left (D) and right (E) drive sides, lateral guide protective covers (F), and cover caps (J) for open profile ends which are necessary to complete each section end. For secure attachment of these components, spring elements (H) are required for each end plate. It's important to note that while screws are needed for assembly—specifically DIN EN ISO 7049 M5x16-G—they must be obtained separately by the customer. The STOP SHEET's design ensures that it should not be walked upon, maintaining its integrity and function as a safety element within the conveyor system. Its inclusion in any conveyor setup contributes significantly towards mitigating potential hazards while also preserving the longevity of the equipment it accompanies.
The Bosch Rexroth STOP SHEET (3842545690) is a specialized component designed to enhance the safety and functionality of conveyor systems. This product is a protective cover that can be used in various parts of the conveyor, including curves, diverters, junctions, and particularly at the ends where the STXH and STH end plates are located. The STOP SHEET is engineered to be easily clipped between rollers using spring elements, ensuring a secure fit without the need for complex installation procedures. This model is crafted from galvanized steel, offering durability and resistance to wear in demanding industrial environments. It has been designed with flexibility in mind, providing compatibility with different widths and roller spacings. The product includes special covers that can be applied to the center sections of conveyors as well as transitions and ends, thereby catering to a wide range of conveyor configurations. Additionally, the STOP SHEET comes with end plates for both left (D) and right (E) drive sides, lateral guide protective covers (F), and cover caps (J) for open profile ends which are necessary to complete each section end. For secure attachment of these components, spring elements (H) are required for each end plate. It's important to note that while screws are needed for assembly—specifically DIN EN ISO 7049 M5x16-G—they must be obtained separately by the customer. The STOP SHEET's design ensures that it should not be walked upon, maintaining its integrity and function as a safety element within the conveyor system. Its inclusion in any conveyor setup contributes significantly towards mitigating potential hazards while also preserving the longevity of the equipment it accompanies.
| The protective covers and end plates are provided in working areas to increase safety |
| They can be ordered separately for conveyor units; for curves, diverters, and junctions they are optionally included in the scope of delivery (SC = 2) |
| The protective covers and end plates are clipped between the rollers using spring elements |
| Note: Do not walk on the protective covers or end plates: Note: Do not walk on the protective covers or end plates |
| Protective covers for various widths and roller spacings |
| Special covers for conveyor section center, transitions, and ends |
| End plates: End plates |
| End plate, left drive side (D): End plate, left drive side (D) |
| End plate, right drive side (E): End plate, right drive side (E) |
| Lateral guide cover |
| Lateral guide protective cover (F), 2x required: Lateral guide protective cover (F), 2x required |
| Thread forming screw: Thread forming screw |
| Screw (G), 4 required for each end plate (D/E) and 2 for each lateral guide cover (F): Screw (G), 4 required for each end plate (D/E) and 2 for each lateral guide cover (F) |
| Spring element |
| Spring element (H), 2x required for each end plate: Spring element (H), 2x required for each end plate |
| Caps |
| cover cap for the open profile ends (J), 2x required for each section end: cover cap for the open profile ends (J), 2x required for each section end |
| Data Sheet | Download Data Sheet |
| 3D CAD | Download 3D CAD |
| Cover cap | yes |
| Productgroup ID | 2 |
| Roller spacing [p] | 195 |
| Material | Steel, galvanized |
| Weight | 1.16 |
| Track width [b] | 455 |
|
No. |
Material |
| 3842545679 | Steel; galvanized |
| 3842545680 | |
| 3842545681 | |
| 3842545682 | |
| 3842545683 | |
| 3842545684 | |
| 3842545685 | |
| 3842545686 | |
| 3842545687 | |
| 3842545476 | |
| 3842545477 | |
| 3842545688 | |
| 3842545689 | |
| 3842545690 | |
| 3842545691 | |
| 3842545692 | |
| 3842545693 | |
| 3842545694 | |
| 3842545695 | |
| 3842545696 | |
| 3842545697 | |
| 3842545474 | |
| 3842545475 | |
| 3842545698 | |
| 3842545276 | |
| 3842545214 | |
| 3842548757 | PP |
| 3842548795 |