BOSCH REXROTH
3842540047

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth BRIDGING CONTACT M CONTROL UNIT (3842540047) is designed to facilitate seamless workstation height adjustment, ensuring ergonomic comfort and adaptability in various settings. This control unit is part of a sophisticated system that includes multiple components for precise control and safety. The lifting module A is engineered to provide smooth and stepless height adjustments with a maximum lifting force of 750N per module, exclusively for compressive forces. With a lift range of 400mm and a velocity of 22mm/s, it can be easily integrated into workstations through screw holes on the face sides or via the integrated mm slot. The module features a cable length of 1700mm for connectivity. Control B is the synchronization hub capable of managing up to four lifting modules simultaneously. It ensures that all connected modules operate in parallel, providing uniform movement and stability across the workstation surface. For user interaction, Hand switch C offers an intuitive interface with a push button for height adjustment. It also includes memory buttons allowing users to store and recall preferred positions effortlessly. The hand switch boasts a generous cable length of 1.7m for flexible placement. The Contact bridge D serves as an additional operational feature for the controller, enabling control without collision protection, while the Mains cable E (not shown) connects the system to power mains. Enhancing safety measures, the system can be outfitted with Pressure wave control strip F and pressure wave sensor G. These components act as mechanical collision protection; if any pressure is detected on the control strip, even minimal, the sensor signals the control unit to retract the lifting modules slightly in response. This feature helps prevent damage or injury by providing an immediate reaction to obstructions. The pressure wave control strip comes with a self-adhesive rear side for easy installation and can be cut to fit specific requirements. Overall, this Bosch Rexroth control unit integrates advanced technology with user-friendly features to deliver reliable performance in height-adjustable workstations while prioritizing safety through its responsive collision protection system.