You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
XRW


$130.80 USD

Tags:

  • SUN HYDRAULICS
  • Material:XRW
  • Summary:Manifold

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics XRW (Material Number: XRW) is a line mount manifold designed for hydraulic systems requiring cross pilot configurations with independent port 4s. This manifold features a mounting hole diameter of 0.41 inches (10.4 mm) and a through mounting hole depth, with a total of two mounting holes available. It includes two open cavities and utilizes the T-22A cavity type, while accommodating port sizes of 3/4 BSPP. The XRW is constructed from 6061T651 aluminum, known for its strength, cost-effectiveness, and exceptional corrosion resistance, making it ideal for demanding environments without the need for anodization. However, it is crucial to consider that manifolds made from aluminum are not rated for pressures exceeding 3000 psi (210 bar), regardless of port type or size specified. This product is suitable for applications where robust and reliable hydraulic connections are necessary, providing efficient flow management in various hydraulic circuits while maintaining system integrity under specified pressure limits.

Body TypeLine mountLine mount
InterfaceNoneNone
Body FeaturesCross pilot with independent port 4sCross pilot with independent port 4s
Mounting Hole Diameter.41 in.10,4 mm
Mounting Hole DepthThroughThrough
Mounting Hole Quantity22
Open Cavities22
CavityT-22A
Port Size3/4" BSPP3/4" BSPP

Show FAQ

Additional Resources



Notes:
  • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.