You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
XMM


$344.70 USD

Tags:

  • SUN HYDRAULICS
  • Material:XMM
  • Summary:Manifold

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics XMM (Material Number: XMM) is a line mount manifold designed with a cross pilot featuring a common port 4s configuration. It includes two open cavities, identified as T-23A, and accommodates SAE 16 port sizes. This manifold is crafted from 6061T651 aluminum, known for its strength, cost-effectiveness, and superior corrosion resistance. The XMM model has a mounting hole diameter of 0.41 inches (10.4 mm) and features through-depth mounting holes with two hole quantities for secure installation. It is important to note that manifolds made from aluminum are not rated for pressures exceeding 3000 psi (210 bar), which should be considered when integrating this component into hydraulic systems. The manifold serves as an essential component in hydraulic applications where efficient fluid management and pressure control are critical, providing reliable performance through its robust design and construction materials.

Body TypeLine mountLine mount
InterfaceNoneNone
Body FeaturesCross pilot with common port 4sCross pilot with common port 4s
Mounting Hole Diameter.41 in.10,4 mm
Mounting Hole DepthThroughThrough
Mounting Hole Quantity22
Open Cavities22
CavityT-23A
Port SizeSAE 16SAE 16

Show FAQ

Additional Resources



Notes:
  • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.