You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
XMD


$344.70 USD

Tags:

  • SUN HYDRAULICS
  • Material:XMD
  • Summary:Manifold

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics XMD (Material Number: XMD) is a line mount hydraulic manifold designed with a cross pilot and common port 4s configuration. It features a body type that supports line mounting without any specific interface requirements. This manifold includes two open cavities, identified as T23A, and accommodates a port size of 3/4 NPTF. The mounting hole diameter measures 0.41 inches (10.4 mm), with holes drilled through for ease of installation, and it includes two mounting holes in total. Constructed from 6061T651 aluminum, known for its excellent corrosion resistance and durability, the manifold is suitable for systems with pressures up to 3000 psi (210 bar). The design ensures efficient hydraulic fluid distribution while maintaining structural integrity under specified pressure conditions. The use of non-anodized aluminum enhances fatigue life by avoiding the brittleness associated with anodized surfaces, making it an ideal choice for applications where longevity and reliability are critical.

Body TypeLine mountLine mount
InterfaceNoneNone
Body FeaturesCross pilot with common port 4sCross pilot with common port 4s
Mounting Hole Diameter.41 in.10,4 mm
Mounting Hole DepthThroughThrough
Mounting Hole Quantity22
Open Cavities22
CavityT-23A
Port Size3/4" NPTF3/4" NPTF

Show FAQ

Additional Resources



Notes:
  • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.