You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
XKM


$423.30 USD

Tags:

  • SUN HYDRAULICS
  • Material:XKM
  • Summary:Manifold

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics XKM (Material Number: XKM) is a line mount manifold designed for hydraulic systems, featuring an inline, cross pilot with shuttle body type. This product is engineered with two open cavities and utilizes the T17A cavity style. The manifold is equipped with SAE 16 port sizes and has a mounting hole diameter of 0.42 inches (10.7 mm), with through-hole depth and a total of 22 mounting holes. It is constructed from 6061T651 aluminum, known for its strength, cost-effectiveness, and exceptional corrosion resistance, making it suitable for various hydraulic applications where durability and reliability are critical. The XKM model is not anodized to maintain its fatigue life and avoid issues related to increased breakaway torque or inspection challenges in anodized bodies. This manifold should be used in systems where the pressure does not exceed 3000 psi (210 bar) due to the material's limitations, ensuring optimal performance within these parameters.

Body TypeLine mountLine mount
InterfaceNoneNone
Body FeaturesInline, cross pilot with shuttleInline, cross pilot with shuttle
Mounting Hole Diameter.42 in.10,7 mm
Mounting Hole DepthThroughThrough
Mounting Hole Quantity22
Open Cavities22
CavityT-17A
Port SizeSAE 16SAE 16

Show FAQ

Additional Resources



Notes:
  • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.