You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
J2I


$82.20 USD

Tags:

  • SUN HYDRAULICS
  • Material:J2I
  • Summary:Manifold

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics J2I (Material Number: J2I) is a line mount body manifold designed for hydraulic systems, featuring a ninety-degree configuration with a reverse flow check and reducing capabilities. This model is specifically crafted to accommodate one open cavity, identified as T-16-3A, and includes two mounting holes with a diameter of 0.28 inches (7.1 mm) that extend through the body for secure installation. The manifold is equipped with SAE 6 port sizes, making it suitable for various hydraulic applications that require efficient fluid control and direction. Constructed from 6061T651 aluminum, the J2I offers excellent corrosion resistance without anodizing, ensuring durability in corrosive environments while maintaining cost-effectiveness and logistical efficiency in production. The design considerations include a maximum system pressure rating of up to 3000 psi (210 bar), dictated by the material's properties rather than port size, which makes this manifold suitable for medium-pressure hydraulic systems.

Body TypeLine mountLine mount
InterfaceNoneNone
Body FeaturesNinety degree with reverse flow check - reducingNinety degree with reverse flow check - reducing
Mounting Hole Diameter.28 in.7,1 mm
Mounting Hole DepthThroughThrough
Mounting Hole Quantity22
Open Cavities11
CavityT-163A
Port SizeSAE 6SAE 6

Show FAQ

Additional Resources



Notes:
  • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.