SUN HYDRAULICS
HTM
$368.60 USD
Tags:
- SUN HYDRAULICS
- Material:HTM
- Summary:Manifold
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics HTM (HTM) is a subplate designed for mounting on the top of a reservoir, featuring an ISO 08 interface and SAE 16 port sizes. It is constructed using 6061T651 aluminum, known for its excellent corrosion resistance and relative strength. The subplate includes specific features such as connections from port P to T and manifold T ports, with open cavities designated as 11CavityT17A. This product is equipped with NPTF ports for the tank and Y connections, which are intended to accommodate down pipes that drop below the oil level, ensuring efficient fluid management within hydraulic systems. The tank port, Y port, and mounting holes come with O-rings to provide a secure seal against the mounting surface. When integrating this subplate into your system, it is crucial to consider the maximum system pressure. Although aluminum manifolds offer good performance in various applications, they are not rated for pressures exceeding 3000 psi (210 bar). This limitation should be factored into design considerations to ensure safe and effective operation within hydraulic systems. The Sun Hydraulics HTM subplate serves as a reliable component in hydraulic setups where moderate pressure ratings are sufficient and where corrosion resistance is required. This component does not undergo anodization due to cost considerations and potential impacts on fatigue life; however, it remains reliable due to its robust material properties. Overall, the Sun Hydraulics HTM subplate provides a solid foundation for hydraulic systems requiring efficient fluid connectivity and moderate pressure handling capabilities.
The Sun Hydraulics HTM (HTM) is a subplate designed for mounting on the top of a reservoir, featuring an ISO 08 interface and SAE 16 port sizes. It is constructed using 6061T651 aluminum, known for its excellent corrosion resistance and relative strength. The subplate includes specific features such as connections from port P to T and manifold T ports, with open cavities designated as 11CavityT17A. This product is equipped with NPTF ports for the tank and Y connections, which are intended to accommodate down pipes that drop below the oil level, ensuring efficient fluid management within hydraulic systems. The tank port, Y port, and mounting holes come with O-rings to provide a secure seal against the mounting surface. When integrating this subplate into your system, it is crucial to consider the maximum system pressure. Although aluminum manifolds offer good performance in various applications, they are not rated for pressures exceeding 3000 psi (210 bar). This limitation should be factored into design considerations to ensure safe and effective operation within hydraulic systems. The Sun Hydraulics HTM subplate serves as a reliable component in hydraulic setups where moderate pressure ratings are sufficient and where corrosion resistance is required. This component does not undergo anodization due to cost considerations and potential impacts on fatigue life; however, it remains reliable due to its robust material properties. Overall, the Sun Hydraulics HTM subplate provides a solid foundation for hydraulic systems requiring efficient fluid connectivity and moderate pressure handling capabilities.
Body Type | SubplateSubplate |
Interface | ISO 08ISO 08 |
Body Features | On P, port 3 to T, manifold T portOn P, port 3 to T, manifold T port |
Open Cavities | 11 |
Cavity | T-17A |
Port Size | SAE 16SAE 16 |
Show FAQ
Additional Resources
- QuickDesign with SmartConnect Offers Drag-and-Drop Schematic Tool
- Manufacturing Sun Cartridge Cavities
- Fluid and Temperature Recommendations
- QuickDesign & SunDesign: Sun's 3- & 5-Axis Solutions
- Manifolds: Materials of Construction
- Sun's Floating Style Screw-In Cartridge
- Sun Model Code Explanation; 999-901-334
- Custom Integrated Packages from Sun
Notes:
- This subplate is designed to mount to the top of a reservoir. Tank and Y are NPTF ports to accommodate down pipes to drop the connections below the oil level. The tank port, Y port, and mounting holes are supplied with O rings to seal to the mounting surface.
- Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.