SUN HYDRAULICS
HFE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics HFE (Material Number: HFE) is a line mount hydraulic manifold designed with a ninety-degree configuration featuring a gauge port. This manifold accommodates one open cavity and utilizes the T-17A cavity type. It includes two mounting holes with a diameter of 0.42 inches (10.7 mm) and depth through the entire body, allowing for secure installation using the provided mounting hole quantity of two. The HFE model is constructed from 6061-T651 aluminum, known for its excellent corrosion resistance and relative strength, making it suitable for hydraulic applications where environmental conditions might otherwise cause deterioration. The port size of this manifold is 1 NPTF, facilitating compatibility with various hydraulic systems that require this standard size. While anodizing is not applied to this aluminum body due to considerations such as cost, logistics, and potential reduction in fatigue life, the material's inherent properties ensure durability without additional surface treatments. It is important to note that manifolds made from aluminum are not rated for pressures exceeding 3000 psi (210 bar), regardless of port type or size specified; thus, careful consideration of system pressure requirements is necessary when integrating this component into any hydraulic application.