SUN HYDRAULICS
SCCALAN
$87.70 USD
Tags:
- SUN HYDRAULICS
- Material:SCCALAN
- Model:SCCA-LAN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics SCCALAN (SCCALAN) is a direct-acting sequence valve with an integrated reverse flow check, designed to supply a secondary circuit with flow once the inlet port pressure exceeds the valve setting. It incorporates an integral check valve for reverse flow from port 2 to port 1, making it ideal for load holding applications. The pressure setting at port 1 is controlled relative to the drain port 3, which must be connected to maintain a pressure reference in the control chamber; blocking this port can cause malfunction due to seal weepage. The pressure at port 3 adds directly to the valve setting at a 1:1 ratio, with a maximum limit of 5000 psi (350 bar). This sequence valve is part of a series where all three-port cartridges are interchangeable in terms of flow path and cavity size. Cartridges with EPDM seals are suitable for phosphate ester fluids but can be damaged by petroleum-based substances. Corrosion-resistant options are available, identified by model code suffixes AP or LH for stainless steel or zinc-nickel plated components, respectively. The design incorporates Sun's floating style construction to minimize binding risks due to installation torque or machining variations. This model has a capacity of 15 gpm (60 L/min), operates at pressures up to 5000 psi (350 bar), and features a typical response time of 2 ms with minimal leakage upon reseat. The adjustment mechanism allows for fine-tuning via an internal hex screw, and the unit is built for robust performance in demanding hydraulic systems.
The Sun Hydraulics SCCALAN (SCCALAN) is a direct-acting sequence valve with an integrated reverse flow check, designed to supply a secondary circuit with flow once the inlet port pressure exceeds the valve setting. It incorporates an integral check valve for reverse flow from port 2 to port 1, making it ideal for load holding applications. The pressure setting at port 1 is controlled relative to the drain port 3, which must be connected to maintain a pressure reference in the control chamber; blocking this port can cause malfunction due to seal weepage. The pressure at port 3 adds directly to the valve setting at a 1:1 ratio, with a maximum limit of 5000 psi (350 bar). This sequence valve is part of a series where all three-port cartridges are interchangeable in terms of flow path and cavity size. Cartridges with EPDM seals are suitable for phosphate ester fluids but can be damaged by petroleum-based substances. Corrosion-resistant options are available, identified by model code suffixes AP or LH for stainless steel or zinc-nickel plated components, respectively. The design incorporates Sun's floating style construction to minimize binding risks due to installation torque or machining variations. This model has a capacity of 15 gpm (60 L/min), operates at pressures up to 5000 psi (350 bar), and features a typical response time of 2 ms with minimal leakage upon reseat. The adjustment mechanism allows for fine-tuning via an internal hex screw, and the unit is built for robust performance in demanding hydraulic systems.
Direct-acting sequence valves with reverse-flow check will supply a secondary circuit with flow once the pressure at the inlet (port 1) has exceeded the valve setting. Additionally, these valves incorporate an integral check valve to provide reverse flow from port 2 (sequence) to port 1 (inlet). The pressure setting of a sequence valve controls the pressure at port 1 relative to the pressure at the drain (port 3).
- Although this is a zero pilot flow valve, port 3 (drain) must be connected to maintain a pressure reference in the control chamber. If port 3 is blocked, reciprocating seal weepage will cause the valve to malfunction.
- Pressure at port 3 is directly additive to the valve setting at a 1:1 ratio and should not exceed 5000 psi (350 bar).
- Suitable for use in load holding applications.
- All 3 port sequence cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size).
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP for external stainless steel components, or /LH for external zinc-nickel plated components. See the CONFIGURATION section for all options. For further details, please see the Materials of Construction page located under TECH RESOURCES.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 15 gpm60 L/min. |
| Factory Pressure Settings Established at | 2 in³/min.30 cc/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 2 ms2 ms |
| Maximum Valve Leakage at Reseat | 10 drops/min.0,7 cc/min. |
| Check Cracking Pressure | 40 psi2,8 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .30 lb0,15 kg |
| Seal kit - Cartridge | Viton: 990-011-006 |
Show FAQ
Additional Resources
- Sequence Valves Technical Tips
- Sun Offers Zinc-Nickel Plating for Corrosion Resistance
- Sun Cartridges with EPDM Seals
- Sun Expands Corrosion-Resistant Solutions
- QuickDesign with SmartConnect Offers Drag-and-Drop Schematic Tool
- Series 4 PLUS Cartridges Offer Higher Flows with Lower Pressure Losses
- Manufacturing Sun Cartridge Cavities
- Sequence Valves
- Units of Measure, Settings, and Conversions
- Sun Model Code Explanation; 999-901-334
- Cavity Information (S-171) and Tooling
- Cartridges: Materials of Construction
- Fluid and Temperature Recommendations
- Performance Data
- Sun's Floating Style Screw-In Cartridge