SUN HYDRAULICS
RVEDWYV
$194.10 USD
Tags:
- SUN HYDRAULICS
- Material:RVEDWYV
- Model:RVED-WYV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RVEDWYV (RVEDWYV) is a ventable, pilot-operated, balanced piston relief cartridge with an external drain, designed as a normally closed pressure regulating valve. This product becomes operational when the pressure at the inlet port reaches the valve setting, allowing it to open to the tank port and throttle flow to regulate pressure. It includes a vent port for remote control by other pilot or two-way valves and a drain port that ensures insensitivity to back pressure. Known for its accuracy and smooth operation, this valve is characterized by low pressure rise versus flow and moderately fast response times. It accepts maximum pressure at port 2, making it suitable for use in cross-port relief circuits with consideration for spool leakage. The main stage orifice is protected by a 150-micron stainless steel screen, though it's not suitable for load-holding applications due to spool leakage. The pressure at port 4 adds directly to the valve setting at a 1:1 ratio and should not exceed 5000 psi (350 bar). Cartridges with EPDM seals are intended for systems using phosphate ester fluids; exposure to petroleum-based fluids will damage these seals. The RVEDWYV model features Sun's floating style construction, minimizing internal part binding risks due to excessive installation torque or machining variations. This valve has a capacity of 30 gpm (120 L/min) and operates under a maximum pressure of 5000 psi (350 bar). Factory settings are established at 4 gpm (15 L/min), with control pilot flow ranging from 10-15 in\u00b3/min (0.16-0.25 L/min). The typical response time is around 10 ms, with maximum valve leakage rated at approximately 3 in\u00b3/min under specific conditions. The adjustment mechanism allows up to five clockwise turns to increase settings, with specific installation torque requirements provided for optimal performance.
The Sun Hydraulics RVEDWYV (RVEDWYV) is a ventable, pilot-operated, balanced piston relief cartridge with an external drain, designed as a normally closed pressure regulating valve. This product becomes operational when the pressure at the inlet port reaches the valve setting, allowing it to open to the tank port and throttle flow to regulate pressure. It includes a vent port for remote control by other pilot or two-way valves and a drain port that ensures insensitivity to back pressure. Known for its accuracy and smooth operation, this valve is characterized by low pressure rise versus flow and moderately fast response times. It accepts maximum pressure at port 2, making it suitable for use in cross-port relief circuits with consideration for spool leakage. The main stage orifice is protected by a 150-micron stainless steel screen, though it's not suitable for load-holding applications due to spool leakage. The pressure at port 4 adds directly to the valve setting at a 1:1 ratio and should not exceed 5000 psi (350 bar). Cartridges with EPDM seals are intended for systems using phosphate ester fluids; exposure to petroleum-based fluids will damage these seals. The RVEDWYV model features Sun's floating style construction, minimizing internal part binding risks due to excessive installation torque or machining variations. This valve has a capacity of 30 gpm (120 L/min) and operates under a maximum pressure of 5000 psi (350 bar). Factory settings are established at 4 gpm (15 L/min), with control pilot flow ranging from 10-15 in\u00b3/min (0.16-0.25 L/min). The typical response time is around 10 ms, with maximum valve leakage rated at approximately 3 in\u00b3/min under specific conditions. The adjustment mechanism allows up to five clockwise turns to increase settings, with specific installation torque requirements provided for optimal performance.
Ventable, pilot-operated, balanced piston relief cartridges with external drain are normally closed pressure regulating valves. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to regulate the pressure. They provide a vent port (port 3) that connects between the main piston and pilot stage to provide for remote control by other pilot or 2-way valves and a drain (port 4) that makes them insensitive to back pressure. These valves are accurate, have low pressure rise vs. flow, they are smooth and quiet, and are moderately fast.
- Will accept maximum pressure at port 2; suitable for use in cross port relief circuits. If used in cross port relief circuits, consider spool leakage.
- Main stage orifice is protected by a 150 micron stainless steel screen.
- Not suitable for use in load holding applications due to spool leakage.
- Pressure at port 4 is directly additive to the valve setting at a 1:1 ratio and should not exceed 5000 psi (350 bar).
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- W and Y controls (where applicable) can be specified with or without a special setting. When no special setting is specified, the valve is adjustable throughout its full range using the W or Y control. When a special setting is specified, this setting represents the maximum setting of the valve.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
Cavity | T-22A |
Series | 2 |
Capacity | 30 gpm120 L/min. |
Factory Pressure Settings Established at | 4 gpm15 L/min. |
Maximum Operating Pressure | 5000 psi350 bar |
Control Pilot Flow | 10 - 15 in³/min.0,16 - 0,25 L/min. |
Response Time - Typical | 10 ms10 ms |
Maximum Valve Leakage at 110 SUS (24 cSt) | 3 in³/min.@1000 psi50 cc/min.@70 bar |
Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
Valve Hex Size | 1 1/8 in.28,6 mm |
Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
Locknut Hex Size | 9/16 in.15 mm |
Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
Model Weight | .70 lb0,30 kg |
Seal kit - Cartridge | Viton: 990-022-006 |
Show FAQ
Additional Resources
- Tri-Grip Handknob Now Offered From Sun as a Standard Control Option
- QuickDesign with SmartConnect Offers Drag-and-Drop Schematic Tool
- Sun Introduces 'Hybrid' Valves
- CE/TÜV Certified Pressure Relief Valves
- Pressure Relief and Regulating Cartridge Valve Technical Tips
- Pilot Operated, Balanced Poppet Relief Valves
- Sun Expands Corrosion-Resistant Solutions
- Sun Offers Zinc-Nickel Plating for Corrosion Resistance
- Sun Cartridges with EPDM Seals
- Series 4 PLUS Cartridges Offer Higher Flows with Lower Pressure Losses
- Pilot-Operated, Balanced Poppet, Anti Shock Reliefs
- CavitySaver multi-function valves deliver single-cartridge solutions
- 'Soft' Relief Eliminates Pressure Spikes
- Manufacturing Sun Cartridge Cavities
- Pressure Relief and Regulating Valves
- Cavity Information (S-171) and Tooling
- Sun Model Code Explanation; 999-901-334
- Cartridges: Materials of Construction
- Fluid and Temperature Recommendations
- Performance Data
- Sun's Floating Style Screw-In Cartridge
- Units of Measure, Settings, and Conversions