You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
RVEDWDN


$184.10 USD

Tags:

  • SUN HYDRAULICS
  • Material:RVEDWDN
  • Model:RVED-WDN
  • Summary:Cartridge

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RVEDWDN (RVEDWDN) is a ventable, pilot-operated, balanced piston relief cartridge designed for precise pressure regulation in hydraulic systems. This normally closed pressure regulating valve activates when inlet port pressure reaches the set threshold, opening to tank port 2 and throttling flow to maintain desired pressure levels. It features a vent port for remote control and an external drain port that ensures insensitivity to back pressure. Known for its accuracy, low-pressure rise versus flow, smooth operation, and moderate speed, the RVEDWDN is suitable for applications requiring maximum pressure acceptance at port 2 and can be used in cross-port relief circuits with consideration of spool leakage. The main stage orifice is safeguarded by a 150-micron stainless steel screen, enhancing durability. However, it is not recommended for load-holding applications due to potential spool leakage. The valve setting can be adjusted using W or Y controls across its full range unless a special setting is specified as the maximum limit. Pressure at port 4 directly affects the valve setting at a 1:1 ratio but should not exceed 5000 psi (350 bar). The cartridge construction utilizes Sun's floating style design to minimize internal part binding from installation torque or machining variations. With a capacity of 30 gpm (120 L/min), factory settings established at 4 gpm (15 L/min), and a maximum operating pressure of 5000 psi (350 bar), this valve offers reliable performance. It features a typical response time of 10 ms and has specific installation requirements including torque specifications and hex sizes for adjustments. The RVEDWDN model weighs .70 lb (.30 kg) and is available with Viton seal kits for compatibility with various fluid types while avoiding damage from petroleum-based substances.

Ventable, pilot-operated, balanced piston relief cartridges with external drain are normally closed pressure regulating valves. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to regulate the pressure. They provide a vent port (port 3) that connects between the main piston and pilot stage to provide for remote control by other pilot or 2-way valves and a drain (port 4) that makes them insensitive to back pressure. These valves are accurate, have low pressure rise vs. flow, they are smooth and quiet, and are moderately fast.

  • Will accept maximum pressure at port 2; suitable for use in cross port relief circuits. If used in cross port relief circuits, consider spool leakage.
  • Main stage orifice is protected by a 150 micron stainless steel screen.
  • Not suitable for use in load holding applications due to spool leakage.
  • Pressure at port 4 is directly additive to the valve setting at a 1:1 ratio and should not exceed 5000 psi (350 bar).
  • Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
  • W and Y controls (where applicable) can be specified with or without a special setting. When no special setting is specified, the valve is adjustable throughout its full range using the W or Y control. When a special setting is specified, this setting represents the maximum setting of the valve.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

CavityT-22A
Series2
Capacity30 gpm120 L/min.
Factory Pressure Settings Established at4 gpm15 L/min.
Maximum Operating Pressure5000 psi350 bar
Control Pilot Flow10 - 15 in³/min.0,16 - 0,25 L/min.
Response Time - Typical10 ms10 ms
Maximum Valve Leakage at 110 SUS (24 cSt)3 in³/min.@1000 psi50 cc/min.@70 bar
Adjustment - Number of Clockwise Turns to Increase Setting55
Valve Hex Size1 1/8 in.28,6 mm
Valve Installation Torque45 - 50 lbf ft61 - 68 Nm
Adjustment Screw Internal Hex Size5/32 in.4 mm
Locknut Hex Size9/16 in.15 mm
Locknut Torque80 - 90 lbf in.9 - 10 Nm
Model Weight.70 lb0,30 kg
Seal kit - CartridgeViton: 990-022-006

Show FAQ

Additional Resources