You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
RVEDKYV


$200.10 USD

Tags:

  • SUN HYDRAULICS
  • Material:RVEDKYV
  • Model:RVED-KYV
  • Summary:Cartridge

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RVEDKYV (RVEDKYV) is a ventable, pilot-operated, balanced piston relief cartridge designed for precise pressure regulation. This normally closed valve opens to the tank port when inlet pressure reaches the set threshold, throttling flow to maintain desired pressure levels. It features a vent port for remote control and an external drain port, making it insensitive to back pressure. The valve is noted for its accuracy, low-pressure rise versus flow, smooth operation, and moderate response speed. It can withstand maximum pressure at port 2 and is suitable for cross-port relief circuits with considerations for spool leakage. The main stage orifice is safeguarded by a 150-micron stainless steel screen. Notably, this model is not recommended for load-holding applications due to potential spool leakage. Pressure at the drain port directly affects the valve setting at a 1:1 ratio but should not exceed 5000 psi (350 bar). Cartridges equipped with EPDM seals are compatible with phosphate ester fluids but can be damaged by petroleum-based substances. Adjustments are made using W or Y controls, which can be specified with or without a special setting; without it, the valve adjusts throughout its range. The Sun floating style construction minimizes internal part binding risks due to installation torque or machining variations. Key specifications include a cavity size of T-22A Series 2 and a capacity of 30 gpm (120 L/min). Factory settings are established at 4 gpm (15 L/min), with maximum operating pressure reaching 5000 psi (350 bar) and control pilot flow between 10-15 in\u00b3/min (0.16-0.25 L/min). The typical response time is approximately 10 ms, and maximum leakage at standard conditions is 3 in\u00b3/min (50 cc/min).

Ventable, pilot-operated, balanced piston relief cartridges with external drain are normally closed pressure regulating valves. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to regulate the pressure. They provide a vent port (port 3) that connects between the main piston and pilot stage to provide for remote control by other pilot or 2-way valves and a drain (port 4) that makes them insensitive to back pressure. These valves are accurate, have low pressure rise vs. flow, they are smooth and quiet, and are moderately fast.

  • Will accept maximum pressure at port 2; suitable for use in cross port relief circuits. If used in cross port relief circuits, consider spool leakage.
  • Main stage orifice is protected by a 150 micron stainless steel screen.
  • Not suitable for use in load holding applications due to spool leakage.
  • Pressure at port 4 is directly additive to the valve setting at a 1:1 ratio and should not exceed 5000 psi (350 bar).
  • Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
  • W and Y controls (where applicable) can be specified with or without a special setting. When no special setting is specified, the valve is adjustable throughout its full range using the W or Y control. When a special setting is specified, this setting represents the maximum setting of the valve.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

CavityT-22A
Series2
Capacity30 gpm120 L/min.
Factory Pressure Settings Established at4 gpm15 L/min.
Maximum Operating Pressure5000 psi350 bar
Control Pilot Flow10 - 15 in³/min.0,16 - 0,25 L/min.
Response Time - Typical10 ms10 ms
Maximum Valve Leakage at 110 SUS (24 cSt)3 in³/min.@1000 psi50 cc/min.@70 bar
Adjustment - Number of Clockwise Turns to Increase Setting55
Valve Hex Size1 1/8 in.28,6 mm
Valve Installation Torque45 - 50 lbf ft61 - 68 Nm
Adjustment Screw Internal Hex Size5/32 in.4 mm
Locknut Hex Size9/16 in.15 mm
Locknut Torque80 - 90 lbf in.9 - 10 Nm
Model Weight.70 lb0,30 kg
Seal kit - CartridgeViton: 990-022-006

Show FAQ

Additional Resources