SUN HYDRAULICS
HDDADCN648
$181.70 USD
Tags:
- SUN HYDRAULICS
- Material:HDDADCN648
- Model:HDDA-DCN@648
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics HDDADCN648 (HDDADCN648) is a versatile solenoid-after check cartridge valve designed for applications requiring reliable load holding and lift-lower operations. This hybrid valve combines a direct-acting solenoid poppet valve with a check function, allowing flow from the inlet port 2 to the system port 1, while blocking flow from port 2 to port 3 when the solenoid is de-energized. It is suitable for integration directly into actuators, offering seamless operation in demanding environments. The solenoid tube assembly is engineered to withstand up to 5000 psi (350 bar), ensuring durability under high-pressure conditions. This cartridge features a wet armature design, which immerses the armature in working fluid, helping manage heat generated by the coil during prolonged energization. However, caution should be taken with fluids like water-glycol mixtures that may degrade under such conditions. The HDDADCN648 offers several manual override options, including configurations without manual overrides, though these are not compatible with weatherized coils. Interchangeable with other Sun Series 1 solenoid products, the coils can be mounted bidirectionally on the tube and offer connector options rated up to IP69K for enhanced environmental protection. Constructed using Sun's floating style design, this valve minimizes internal part binding caused by excessive torque or machining variations during installation. Key specifications include a capacity of 10 gpm (40 L/min), a typical response time of 50 ms, and maximum leakage of 10 drops/min at 110 SUS (24 cSt). The manual override requires a force of approximately 5 lbs/1000 psi at Port 1 and has an approximate mechanical life expectancy of about 7,000 cycles. The valve's cavity type is T-11A and it supports switching frequencies up to 15,000 cycles per hour.
The Sun Hydraulics HDDADCN648 (HDDADCN648) is a versatile solenoid-after check cartridge valve designed for applications requiring reliable load holding and lift-lower operations. This hybrid valve combines a direct-acting solenoid poppet valve with a check function, allowing flow from the inlet port 2 to the system port 1, while blocking flow from port 2 to port 3 when the solenoid is de-energized. It is suitable for integration directly into actuators, offering seamless operation in demanding environments. The solenoid tube assembly is engineered to withstand up to 5000 psi (350 bar), ensuring durability under high-pressure conditions. This cartridge features a wet armature design, which immerses the armature in working fluid, helping manage heat generated by the coil during prolonged energization. However, caution should be taken with fluids like water-glycol mixtures that may degrade under such conditions. The HDDADCN648 offers several manual override options, including configurations without manual overrides, though these are not compatible with weatherized coils. Interchangeable with other Sun Series 1 solenoid products, the coils can be mounted bidirectionally on the tube and offer connector options rated up to IP69K for enhanced environmental protection. Constructed using Sun's floating style design, this valve minimizes internal part binding caused by excessive torque or machining variations during installation. Key specifications include a capacity of 10 gpm (40 L/min), a typical response time of 50 ms, and maximum leakage of 10 drops/min at 110 SUS (24 cSt). The manual override requires a force of approximately 5 lbs/1000 psi at Port 1 and has an approximate mechanical life expectancy of about 7,000 cycles. The valve's cavity type is T-11A and it supports switching frequencies up to 15,000 cycles per hour.
This solenoid-after check cartridge is a hybrid valve incorporating a direct acting solenoid poppet valve teed in after the check function. The check valve flow is from the inlet (port 2) to the system (port 1). With the solenoid de-energized flow from (port 2) to (port 3) is blocked. This combination valve is typically used in lift/lower applications and can be integrated directly into the actuator.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- Suitable for load holding applications.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
Cavity | T-11A |
Series | 1 |
Capacity | 10 gpm40 L/min. |
Maximum Operating Pressure | 5000 psi350 bar |
Response Time - Typical | 50 ms50 ms |
Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
Check Cracking Pressure | 30 psi2 bar |
Switching Frequency | 15000 cycles/hr15000 cycles/hr |
Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
Manual Override Stroke | .10 in.2,5 mm |
Solenoid Tube Diameter | .75 in.19 mm |
Valve Hex Size | 7/8 in.22,2 mm |
Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
Seal kit - Cartridge | Viton: 990-011-006 |
Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ