SUN HYDRAULICS
FPHKMEN224N
$365.40 USD
Tags:
- SUN HYDRAULICS
- Material:FPHKMEN224N
- Model:FPHK-MEN@224N
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FPHKMEN224N (Material Number: FPHKMEN224N) is a pilot-operated, normally closed, electroproportional throttle valve featuring a reverse free flow check. This advanced hydraulic component is designed to control fluid flow between port 1 and port 2, with the capability of allowing reverse free flow from port 2 to port 1. It operates efficiently under pressures up to 5000 psi and can handle a capacity of up to 60 gpm (240 L/min). The valve's solenoid coils are interchangeable with other full-flow, solenoid-operated valves from Sun Hydraulics and can be mounted in either direction on the tube. For optimal performance, it is recommended to use an amplifier with current sensing and adjustable dither between 100-250 Hz. This model incorporates Sun's floating style construction, which helps minimize internal part binding due to excessive installation torque or machining variations. The valve offers several manual override options, including a momentary twist override that allows for manual shifting by twisting the override clockwise by 90 degrees. It requires a manual override force of approximately 5 lbs/1000 psi at Port 1 and features a manual override stroke of .06 inches (1.50 mm). The valve hex size is 1\u00bc inches (31.8 mm), and it should be installed with a torque between 150-160 lbf ft (203-217 Nm). To ensure low leakage rates, the maximum valve leakage at 110 SUS (24 cSt) is specified as no more than 10 drops/min at 5000 psi (0.7 cc/min at 350 bar). This model weighs around 1.50 lb (0.70 kg), increasing to approximately 2.00 lb when fitted with the coil. Seal kits are available for both cartridge and coil components, utilizing Viton material for enhanced durability and performance in demanding applications.
The Sun Hydraulics FPHKMEN224N (Material Number: FPHKMEN224N) is a pilot-operated, normally closed, electroproportional throttle valve featuring a reverse free flow check. This advanced hydraulic component is designed to control fluid flow between port 1 and port 2, with the capability of allowing reverse free flow from port 2 to port 1. It operates efficiently under pressures up to 5000 psi and can handle a capacity of up to 60 gpm (240 L/min). The valve's solenoid coils are interchangeable with other full-flow, solenoid-operated valves from Sun Hydraulics and can be mounted in either direction on the tube. For optimal performance, it is recommended to use an amplifier with current sensing and adjustable dither between 100-250 Hz. This model incorporates Sun's floating style construction, which helps minimize internal part binding due to excessive installation torque or machining variations. The valve offers several manual override options, including a momentary twist override that allows for manual shifting by twisting the override clockwise by 90 degrees. It requires a manual override force of approximately 5 lbs/1000 psi at Port 1 and features a manual override stroke of .06 inches (1.50 mm). The valve hex size is 1\u00bc inches (31.8 mm), and it should be installed with a torque between 150-160 lbf ft (203-217 Nm). To ensure low leakage rates, the maximum valve leakage at 110 SUS (24 cSt) is specified as no more than 10 drops/min at 5000 psi (0.7 cc/min at 350 bar). This model weighs around 1.50 lb (0.70 kg), increasing to approximately 2.00 lb when fitted with the coil. Seal kits are available for both cartridge and coil components, utilizing Viton material for enhanced durability and performance in demanding applications.
This valve is a pilot operated, normally closed, electro-proportional throttle with reverse free flow check. Energizing the coil generates an opening force on the pilot stage which vents the main stage poppet to open proportionally. Metered flow is from port 1 to port 2 with reverse free flow from port 2 to port 1.
- Capable of operating with pressures up to 5000 psi.
- Coils are interchangeable with Sun's other full flow, solenoid-operated valves and can be mounted on the tube in either direction.
- This cartridge has several manual override choices, including no manual override. See Option Configuration.
- For optimum performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
- The momentary/twist override option "E" allows the operator to shift the valve by twisting the manual override clockwise 90 degrees.
- Depending on circuit requirements, a reverse free flow check bypassing the compensator may be needed when using the FPHK with an external compensator.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-16A |
| Series | 3 |
| Capacity | 60 gpm240 L/min. |
| Recommended dither frequency | 100 Hz100 Hz |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Deadband, nominal (as a percentage of input) | 25%25% |
| Manual Override Stroke | .06 in.1,50 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 1 1/4 in.31,8 mm |
| Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
| Model Weight | 1.50 lb0,70 kg |
| Model Weight (with coil) | 2.00 lb2.00 lb |
| Seal kit - Cartridge | Viton: 990-016-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ