SUN HYDRAULICS
DRBDCAN
$136.20 USD
Tags:
- SUN HYDRAULICS
- Material:DRBDCAN
- Model:DRBD-CAN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DRBDCAN (Material Number: DRBDCAN) is a direct-acting, 3-way directional cartridge valve designed for moderate flow circuits, with port 1 to 2 open and port 3 blocked. This valve is versatile and can be used independently or to actuate larger pilot-operated directional or logic cartridges. It shifts when the pressure differential between port 1 and port 3 surpasses the set threshold, with pressure at port 3 directly adding to the setting. Consequently, port 3 may not be suitable as a work port in certain circuits, but a 4-port version of this valve could offer a solution. The direct-acting design ensures low internal leakage and minimal pilot flow consumption. These valves are interchangeable with pilot-operated versions, sharing the same cavities and flow paths. The DRBDCAN features Sun's floating style construction, reducing the likelihood of internal parts binding due to excessive installation torque or machining variations. It has a T11A cavity and belongs to Series 1 with a capacity of up to 7 gpm (28 L/min). Factory pressure settings are established at 4 gpm (15 L/min), and it can withstand a maximum operating pressure of 5000 psi (350 bar). The maximum valve leakage at 110 SUS (24 cSt) is rated at 2 in\u00b3/min (30 cc/min). For adjustments, it requires approximately five clockwise turns to increase settings. The valve's hex size is 7/8 inch (22.2 mm), with an installation torque range of 30 - 35 lbf ft (41 - 47 Nm). The adjustment screw has an internal hex size of 5/32 inch (4 mm), while the locknut hex size measures at 9/16 inch (15 mm) with a locknut torque range of 80 - 90 lbf in (9 -10 Nm). The model weighs approximately .60 lb (.30 kg) and uses Viton seal kits for cartridge sealing.
The Sun Hydraulics DRBDCAN (Material Number: DRBDCAN) is a direct-acting, 3-way directional cartridge valve designed for moderate flow circuits, with port 1 to 2 open and port 3 blocked. This valve is versatile and can be used independently or to actuate larger pilot-operated directional or logic cartridges. It shifts when the pressure differential between port 1 and port 3 surpasses the set threshold, with pressure at port 3 directly adding to the setting. Consequently, port 3 may not be suitable as a work port in certain circuits, but a 4-port version of this valve could offer a solution. The direct-acting design ensures low internal leakage and minimal pilot flow consumption. These valves are interchangeable with pilot-operated versions, sharing the same cavities and flow paths. The DRBDCAN features Sun's floating style construction, reducing the likelihood of internal parts binding due to excessive installation torque or machining variations. It has a T11A cavity and belongs to Series 1 with a capacity of up to 7 gpm (28 L/min). Factory pressure settings are established at 4 gpm (15 L/min), and it can withstand a maximum operating pressure of 5000 psi (350 bar). The maximum valve leakage at 110 SUS (24 cSt) is rated at 2 in\u00b3/min (30 cc/min). For adjustments, it requires approximately five clockwise turns to increase settings. The valve's hex size is 7/8 inch (22.2 mm), with an installation torque range of 30 - 35 lbf ft (41 - 47 Nm). The adjustment screw has an internal hex size of 5/32 inch (4 mm), while the locknut hex size measures at 9/16 inch (15 mm) with a locknut torque range of 80 - 90 lbf in (9 -10 Nm). The model weighs approximately .60 lb (.30 kg) and uses Viton seal kits for cartridge sealing.
Direct-acting, 3-way directional cartridges (1 to 2 open, 3 blocked) are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Because of their direct-acting design, these cartridges feature low internal leakage and low pilot flow consumption.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 7 gpm28 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 2 in³/min.30 cc/min. |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-011-006 |
Show FAQ