SUN HYDRAULICS
GCV
$33.00 USD
Tags:
- SUN HYDRAULICS
- Material:GCV
- Summary:Manifold
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics GCV (GCV) is a versatile hydraulic valve designed for use in a variety of fluid control applications. This particular model is part of the Series 1 Open Cavities and features an 11 Cavity T-13A design. It is crucial to consider the maximum system pressure when utilizing this valve, as the pressure rating of any manifold it is used with will depend on both the manifold material and port type/size. Specifically, manifolds constructed from aluminum should not exceed a pressure rating of 3000 psi (210 bar), regardless of port specifications. The GCV model's robust construction and precise engineering make it suitable for integration into systems where reliable performance under specified conditions is essential.
The Sun Hydraulics GCV (GCV) is a versatile hydraulic valve designed for use in a variety of fluid control applications. This particular model is part of the Series 1 Open Cavities and features an 11 Cavity T-13A design. It is crucial to consider the maximum system pressure when utilizing this valve, as the pressure rating of any manifold it is used with will depend on both the manifold material and port type/size. Specifically, manifolds constructed from aluminum should not exceed a pressure rating of 3000 psi (210 bar), regardless of port specifications. The GCV model's robust construction and precise engineering make it suitable for integration into systems where reliable performance under specified conditions is essential.
| Series | 1 |
| Open Cavities | 11 |
| Cavity | T-13A |
Notes:
- Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.