X2CNLCNCA211 - Solenoid operated, rapid advance and feed flow control assembly

Part Number: X2CNLCNCA211

Manufacturer: Sun Hydraulics

DESCRIPTION:

This assembly consists of a needle valve which is a fully-adjustable orifice used to regulate flow. It is infinitely adjustable from fully closed up to the maximum orifice diameter. It is not pressure-compensated. It may be used as flow controls or as shutoff valves. The rapid or feed rate is selected by a solenoid operated (normally open or closed) 2-way, 2-position valve.

  • The sharp-edged orifice design minimizes flow variations due to viscosity changes.
  • A balanced adjustment mechanism allows for easy adjustment even at high pressures.
  • Because needle valves are non-compensating devices, the fixed orifice size will regulate flow through the valve in proportion to the square root of the pressure differential across ports 1 and 2.

Capacity15 gpm60 L/min.
Body TypeSandwichSandwich
InterfaceISO 03ISO 03
Body FeaturesMeter in P or Meter out TMeter in P or Meter out T
Stack Height1.75 in.44,5 mm
Seal Plate Included (see notes)YesYes

Show FAQ

Additional Resources



Notes:
  • Customer to install locating pin (included) for functional orientation desired.
  • Stack height value in technical data table includes seal retainer plate.
  • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.

Related Files

Return to Store Home

Mouse move on Image to zoom

Our Suppliers