FTDCXYN - 4-way, 3-position, meter in proportional directional valve

Part Number: FTDCXYN

Manufacturer: Sun Hydraulics


This valve is a 4-way, 3 position, proportional directional valve. Work ports 2 and 4 are drained to 5 in the center position and port 3 is closed. Pilot pressure at port 1 opposes the spring and creates a variable metering orifice between ports 3 and 4 that is proportional to the pressure at 1. Piloting 6 opens 3 to 2. The force balance of the flow forces, spring and pilot pressure results in a degree of partial self compensation as the load pressure changes.

Pressure at ports 1 and 6 directly oppose each other.

  • Nominal operating pressures for port 1 and port 6 should not exceed 500 psi (35 bar).
  • These valves may be pressure compensated by an external, modulating, logic element. Use LR_C-XHN for a bypass circuit or LP_C-XHN for a restrictive circuit.
  • The valve provides a degree of self-compensation and may be used as a flow control. To increase the accuracy of flow control, an external, modulating, logic element can be used to maintain a constant flow over a wider range of flows and pressures. See performance curves for additional information.
  • Pressure at ports 1 and 6 directly oppose each other.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

Cavity T-52A
Series 2
Capacity 18 gpm70 L/min.
Minimum Pilot Pressure Required to Shift Valve 80 psi5,5 bar
Pilot Pressure Required for Full Shift at Rated Flow 300 psi20 bar
Maximum Operating Pressure 5000 psi350 bar
Maximum Valve Leakage at 110 SUS (24 cSt) 2 in³/min.30 cc/min.
Pilot Volume Displacement .04 in³0,66 cc
Hysteresis ± 2 %± 2 %
Valve Hex Size 1 1/8 in.28,6 mm
Valve Installation Torque 45 - 50 lbf ft61 - 68 Nm
Model Weight 1.00 lb0,45 kg
Seal kit - Cartridge Viton: 990-052-006

Show FAQ

Related Files

Return to Store Home

Mouse move on Image to zoom

Our Suppliers