Category: OLF 5 (with motor)
The compact and stationary fluid conditioning units of the OLF 5 are used for the fine filtration of hydraulic and lubrication oils in bypass flow. Versions without motor-pump unit are also available. The Toploader version is distinguished by the "upward" dismantling of elements (tool-free element replacement). The Dimicron elements used exhibit the following properties:
• Particularly high contamination retention capacity
• Environment-friendly disposal (ashability) and
• water retention (optional: Aquamicron)
The OLF 5 is used on machine tools, plastic injection machines, mobile devices and in wind power.
• Flow rate Hydraulic Line: max. 15 l/min
Flow rate Lubrication Line: max. 4 l/min
• Operating pressure Hydraulic Line: max. 4.5 bar
operating pressure Lubrication Line: max. 3.5 bar
• Improvement of component and filter service life
• Greater machine availability
• Longer oil change intervals
• Lower space requirements through compact construction
• High service-friendliness
• High contamination retention capacity of the elements
• Environment-friendly element disposal through ashability
-
OLF 5 (with motor) - 3160446 - OLF-5-S-120-AE-N5DM002-F
The compact and stationary fluid conditioning units of the OLF 5 are used for the fine filtration of hydraulic and lubrication oils in bypass flow.
-
OLF-5-S-120-K-N5AM002-E
The compact and stationary fluid conditioning units of the OLF 5 are used for the fine filtration of hydraulic and lubrication oils in bypass flow.
-
OLF-5-S-120-K-N5DM002-E
The compact and stationary fluid conditioning units of the OLF 5 are used for the fine filtration of hydraulic and lubrication oils in bypass flow.
-
OLF-5-S-120-K-N5DM002-F6
The compact and stationary fluid conditioning units of the OLF 5 are used for the fine filtration of hydraulic and lubrication oils in bypass flow.
-
OLF-5-S-120-K-N5DM005-E
The compact and stationary fluid conditioning units of the OLF 5 are used for the fine filtration of hydraulic and lubrication oils in bypass flow.
-
OLF-5-S-120-K-N5DM020-F6
The compact and stationary fluid conditioning units of the OLF 5 are used for the fine filtration of hydraulic and lubrication oils in bypass flow.
-
OLF-5-S-120-K-Z-Z
The compact and stationary fluid conditioning units of the OLF 5 are used for the fine filtration of hydraulic and lubrication oils in bypass flow.
-
OLF-5-S-120-L-N5DM020-E
The compact and stationary fluid conditioning units of the OLF 5 are used for the fine filtration of hydraulic and lubrication oils in bypass flow.
-
OLF-5-S-120-M-N5AM002-E
The compact and stationary fluid conditioning units of the OLF 5 are used for the fine filtration of hydraulic and lubrication oils in bypass flow.
-
OLF-5-S-120-M-N5AM002-F6
The compact and stationary fluid conditioning units of the OLF 5 are used for the fine filtration of hydraulic and lubrication oils in bypass flow.
Recent News
-
New compact hydraulic PowerPacks from DHP
Over the years DHP PowerPacks has found its niche in highly engineered custom products. This has
-
Hydrotech Acquired by Fluid System Components
Hydrotech has been acquired by Fluid System Components. This acquisition allows us to better serve
-
Hydrotech Adds Bosch Rexroth Assembly Technology Line for Framing, Safety, and Conveyor Solutions
Hydrotech has added the Assembly Technology product line from longtime partner Bosch Rexroth to
Engineering Tools
- Basic Fluid Power Formulas
- Actuator Formulas
- Pump Formulas
- General Fluid Power Guidelines
- Valve Sizing for Cylinder Actuation Direct Formula
- Calculators
- Converters
- Electrical Units
- Electrical Formulas