The inlet elements TA-05-__ are employed to connect the external P and T lines to the P and T channels inside the ED elements of the Directional Valve Assembly. They incorporate a pressure relief cartridge which limits the primary pressure in the P line. The relief setting can be checked through the Test Point port G.
When fitted, the Normally Open Solenoid Unloading VEI Cartridge unloads to Tank all the P line flow; unloading stops when the cartridge coil is energized.
•Port sizes: P and T – SAE 8; LS and G – SAE 4.
•Ports LS and G are provided with plugs.
•Special plating and coating available, C.F.
Sun Hydraulics Upgrades The Already Powerful Manifold Design Tool QuickDesign
Not every manifold design requires 5-axis technology, but if you could reduce the manifold size and
Hydrotech Product Offering For ABB Industrial Robots
As one of the world’s leading robotics suppliers, ABB Robotics is active in 53 countries and over
Up To 80% Energy Savings With Sytronix Variable-Speed Pump Drive from Bosch Rexroth
Sytronix is the "smart integration of hydraulics and electronics": a bold combination of the key