BOSCH REXROTH
3842546630
All Other Products

The chain conveyor is placed on the ground by means of supports (and fastened) or even suspended from the ceiling. The suspension needs to be determined depending on the application.

The floor supports for sizes 160, 240 and 320 are constructed from the following single parts:

Foot 80x80 (A) strut profile 80x80L (B), cover cap (C), holder for attaching the section profiles (D) 160, 240 or 320

To support the motors / drives, a separate holder (E) is used

Depending on the speed, accumulation behavior and weight, the supports are to be fixed at a distance of about 2 ... 3 m The supports for the stainless steel system may also be used for the aluminum system Holder (E) may only be used for AL systems Depending on the returning chain, the height adjustment range is up to 79 mm (D) By removing the centering lug, the holder (D) can also be used for ascending and descending sections (up to 45°, depending on the returning chain) Holder (D) with drilling aid for additional bores to fasten drip trays, safety guards for returning chains, etc.