BOSCH REXROTH
3842547049
All Other Products
VF plus: curve wheel Al
BOSCH REXROTH
MATERIAL: 3842547049
SUMMARY: VF plus: curve wheel Al
Quantity in stock: 1
Quantity Details:- Hydrotech Stock: 0 can ship April 16, 2024
- Factory Stock: 1 can ship June 11, 2024
The curve wheel is used for the horizontal change in direction of the chain. It enables low-friction direction changes with very small radii.
Size: 65, 90, 120 Deflection angles Suitable chain types: all For circuit systems without chain return in bottom run (using a curve wheel or connection drive), the appropriate cover must be used for personal safety reasons|
Material |
|
| Curve wheel AL VFplus 65 30° |
Housing: diecast aluminum Chain wheel: PA; white Ball bearings: stainless steel/FDA |
| Curve wheel AL VFplus 65 45° | |
| Curve wheel AL VFplus 65 90° | |
| Curve wheel AL VFplus 65 180° | |
| Curve wheel AL VFplus 90 30° | |
| Curve wheel AL VFplus 90 45° | |
| Curve wheel AL VFplus 90 90° | |
| Curve wheel AL VFplus 90 180° | |
| Curve wheel AL VFplus 120 30° | |
| Curve wheel AL VFplus 120 45° | |
| Curve wheel AL VFplus 120 90° | |
| Curve wheel AL VFplus 120 180° |
Combination matrix
|
Straight |
Curves |
Drives |
Return Unit |
||||||||||||
|
Section profile AL open |
Section profile AL closed |
Assembly module |
Curve wheel |
Roller curve* |
Horizontal sliding curve |
Vertical curve |
Head drive |
Curve wheel drive |
Connection drive |
Center drive (STS)** |
Basic unit |
90° (STS)** |
Transmission kit |
||
|
Straight |
Section profile AL open |
J |
|||||||||||||
|
Section profile AL closed |
J |
J |
|||||||||||||
|
Assembly module |
J |
J |
N |
||||||||||||
|
Curves |
Curve wheel |
J |
J |
L2) |
L2) |
||||||||||
|
Roller curve* |
J |
N |
J |
N |
L1) |
||||||||||
|
Horizontal sliding curve |
J |
J |
J |
J |
N |
L1) |
|||||||||
|
Vertical curve |
J |
J |
J |
J |
L1) |
L1) |
L1) |
||||||||
|
Drives |
Head drive |
J |
J |
L2) |
L2) |
L1, 4) |
L1) |
L1, 4) |
N |
||||||
|
Curve wheel drive |
J |
J |
L2) |
L2) |
N |
L1) |
L1) |
N |
N |
||||||
|
Connection drive |
J |
J |
L2) |
L2) |
N |
L1) |
L1) |
N |
N |
N |
|||||
|
Center drive (STS)** |
L5) |
L5) |
L2, 5) |
L2, 5) |
N |
L1, 5) |
L1, 5) |
N |
N |
N |
N |
||||
|
Return Unit |
Basic unit |
J |
J |
L2) |
L2) |
L1, 4) |
L1) |
L1, 4) |
L2) |
N |
N |
L2, 3) |
L2, 3) |
||
|
90° (STS)** |
L5) |
L5) |
L2, 5) |
L2, 5) |
N |
L1, 5) |
L1, 5) |
N |
N |
L2, 5) |
N |
N |
L2) |
||
|
Transmission kit |
N |
N |
N |
N |
N |
N |
N |
J |
N |
J |
N |
J |
N |
N |
|
|
J |
possible without restrictions |
* Support profile must project 76+2 mm into the roller curve. |
|||||||||||||
|
L |
possible with restrictions |
** AL-STS adapter included in the scope of delivery. |
|||||||||||||
|
N |
not possible |
||||||||||||||
| 1) | Profile connector not required |
| 2) | Use of a profile piece (Lmin = 120 mm) |
| 3) | Assembly module required |
| 4) | For sizes 160-320: shorten the support rail on the dotted line |
| 5) | Use of the AL-STS adapter |
Curve wheel AL
|
b |
α |
A |
B |
C |
R |
|
mm |
° |
mm |
mm |
mm |
mm |
| 65 | 30 | 185.5 | 324.5 | 279.4 | 153 |
| 45 | 185.5 | 324.5 | 301.9 | 153 | |
| 90 | 185.5 | 324.5 | 285.5 | 153 | |
| 180 | 185.5 | 285.5 | 153 | ||
| 90 | 30 | 210.5 | 349.5 | 291.9 | 165.5 |
| 45 | 210.5 | 349.5 | 319.6 | 165.5 | |
| 90 | 210.5 | 349.5 | 310.5 | 165.5 | |
| 180 | 210.5 | 310.5 | 165.5 | ||
| 120 | 30 | 240.5 | 379.5 | 306.9 | 180.5 |
| 45 | 240.5 | 379.5 | 340.8 | 180.5 | |
| 90 | 240.5 | 379.5 | 340.5 | 180.5 | |
| 180 | 240.5 | 340.5 | 180.5 |
Curve wheel AL VFplus 30°
Curve wheel AL VFplus 45°
Curve wheel AL VFplus 90°
Curve wheel AL VFplus 180°
Note: High-pressure cleaning of the ball bearings is not permitted.