BOSCH REXROTH
3842547444
All Other Products
VF plus: conveyor section accessories
BOSCH REXROTH
MATERIAL: 3842547444
SUMMARY: VF plus: conveyor section accessories
Quantity in stock: 0
Foot 60x60 (A), strut profile 60x60 (B), cap (C), holder for attaching the section profiles (D) 65, 90 or 120. A separate holder (E) is used to support the motors / drives Depending on the speed, accumulation behavior and weight, the supports are to be fixed at a distance of about 2 ... 3 m The supports for the stainless steel system may also be used for the aluminum system The holder (E) may only be used for AL systems Depending on the return chain, the height adjustment range is up to 79 mm (D) The holder (D) can also be used for ascending and descending conveyor sections (up to approx. 45°, depending on the return chain) by removing the centering lugs Holder (D) with drill guide for additional holes to fasten drip trays, trap guards for return chains, etc. Holder is easily centered in the slot thanks to centering lugs (D) Very simple assembly with plug-in screw connection (D)
|
Material |
|
| Foot AL 60x60 |
Aluminum, silver coating (RAL 9006) Woven wire grille and fastening material: steel; galvanized |
| Strut profile 60x60, 20xL=5600mm | Aluminum, anodized |
| Strut profile 60x60 | |
| Mounting hole plug 60x60, black | PP |
| Holder AL, VFplus 65 |
Holder: diecast aluminum, silver Fastening material: steel; galvanized |
| Holder AL, VFplus 90 | |
| Holder AL, VFplus 120 | |
| Holder engine support AL, VFplus 65 | Steel; galvanized |
| Holder engine support AL, VFplus 90 | |
| Holder engine support AL, VFplus 120 | |
| Floor dowel L95 | |
| Washer t=1mm | Spring steel, stainless |
| Washer t=3mm |
Holder adjustment range
The aluminum holder adjustment range shown relates to the standard installation position (holder flush with the profile end) and the use of a flat chain for horizontal running of the chain. For vertical use, the adjustment range is reduced depending on the angle.
Condition on delivery
Not assembled
Scope of delivery
| Foot AL 60x60 | incl. fastening material (FS1) |
| Strut profile 60x60, 20xL=5600mm | |
| Strut profile 60x60 | |
| Mounting hole plug 60x60, black | |
| Holder AL, VFplus 65 | 2 x holder, fastening material (FS) |
| Holder AL, VFplus 90 | |
| Holder AL, VFplus 120 | |
| Holder engine support AL, VFplus 65 | Incl. fastening material |
| Holder engine support AL, VFplus 90 | |
| Holder engine support AL, VFplus 120 | |
| Floor dowel L95 | |
| Washer t=1mm | |
| Washer t=3mm |