BOSCH REXROTH
3842552900
All Other Products
VF plus: drive&return accessories
BOSCH REXROTH
MATERIAL: 3842552900
SUMMARY: VF plus: drive&return accessories
Quantity in stock: 1
Quantity Details:- Hydrotech Stock: 0 can ship March 29, 2024
- Factory Stock: 1 can ship June 7, 2024
If the available space is not sufficient for mounting the drive kit directly on the basic unit, the transmission kit also enables conversion to a transmission drive at a later date. The basic units head drive, connection drive and closed head drive are quickly turned into a transmission drive with variable mounting position with the transmission kit and drive kit.
Only for AL systems Sizes 65, 90, 120 Permissible chain tensile force: Fmax = 1250 N Support required Not suitable for wet operation/cleaning Mounting on STS version on request
Material |
|
Transmission kit VFplus |
Side plate: stainless steel Belt: rubber compound Cover: ABS Connecting parts: aluminum |
Combination matrix
Straight |
Curves |
Drives |
Return Unit |
||||||||||||
Section profile AL open |
Section profile AL closed |
Assembly module |
Curve wheel |
Roller curve* |
Horizontal sliding curve |
Vertical curve |
Head drive |
Curve wheel drive |
Connection drive |
Center drive (STS)** |
Basic unit |
90° (STS)** |
Transmission kit |
||
Straight |
Section profile AL open |
J |
|||||||||||||
Section profile AL closed |
J |
J |
|||||||||||||
Assembly module |
J |
J |
N |
||||||||||||
Curves |
Curve wheel |
J |
J |
L2) |
L2) |
||||||||||
Roller curve* |
J |
N |
J |
N |
L1) |
||||||||||
Horizontal sliding curve |
J |
J |
J |
J |
N |
L1) |
|||||||||
Vertical curve |
J |
J |
J |
J |
L1) |
L1) |
L1) |
||||||||
Drives |
Head drive |
J |
J |
L2) |
L2) |
L1, 4) |
L1) |
L1, 4) |
N |
||||||
Curve wheel drive |
J |
J |
L2) |
L2) |
N |
L1) |
L1) |
N |
N |
||||||
Connection drive |
J |
J |
L2) |
L2) |
N |
L1) |
L1) |
N |
N |
N |
|||||
Center drive (STS)** |
L5) |
L5) |
L2, 5) |
L2, 5) |
N |
L1, 5) |
L1, 5) |
N |
N |
N |
N |
||||
Return Unit |
Basic unit |
J |
J |
L2) |
L2) |
L1, 4) |
L1) |
L1, 4) |
L2) |
N |
N |
L2, 3) |
L2, 3) |
||
90° (STS)** |
L5) |
L5) |
L2, 5) |
L2, 5) |
N |
L1, 5) |
L1, 5) |
N |
N |
L2, 5) |
N |
N |
L2) |
||
Transmission kit |
N |
N |
N |
N |
N |
N |
N |
J |
N |
J |
N |
J |
N |
N |
|
J |
possible without restrictions |
* Support profile must project 76+2 mm into the roller curve. |
|||||||||||||
L |
possible with restrictions |
** AL-STS adapter included in the scope of delivery. |
|||||||||||||
N |
not possible |
1) | Profile connector not required |
2) | Use of a profile piece (Lmin = 120 mm) |
3) | Assembly module required |
4) | For sizes 160-320: shorten the support rail on the dotted line |
5) | Use of the AL-STS adapter |
Transmission kit
No. |
b |
3842552900 | 65, 90, 120 |
Transmission kit, specifications about support height
H = Transport height (top edge of chain)S = Support height
L = Profile length (L = S - 15)
Motor support
The support is mounted on the inside (below the chain).
Note: The motor must be mounted so that there are no collisions with the support.
Note: High-pressure cleaning of the ball bearings is not permitted.
Condition of Delivery
Fully assembled |
Scope of delivery
Incl. fastening material |