BOSCH REXROTH
3842998799
All Other Products
Elements TS5: drive heads
BOSCH REXROTH
MATERIAL: 3842998799
SUMMARY: Elements TS5: drive heads
Due to extremely high demand, please call 888-651-5712 for availability
The TS 5 drive concept enables one- or two-sided drive of an Open Center section connected to adjacent sections. Depending on the loading situation, a separate AS 5/OC drive may not be required.
1) | Drive side |
A, B: Drive on one side
C, D, E: Drive on both sides
Load position centered on WT
bWT x lWT (mm) |
mWTmax (kg) |
DD = |
455 x 455 |
150 |
11) |
455 x 650 |
250 |
11) |
650 x 650 |
250 |
11) |
650 x 845 |
300 |
11) |
845 x 845 |
300 |
11) |
845x 1040 |
300 |
11) |
1) | Drive on one side is adequate (DD = 1) |
Load position off-center, within the permissible load area
bWT x lWT (mm) |
mWTmax (kg) |
DD = |
mWTmax (kg) |
DD = |
455 x 455 |
100 |
11) |
150 |
x2) |
455 x 650 |
160 |
11) |
250 |
x2) |
650 x 650 |
160 |
11) |
250 |
x2) |
650 x 845 |
200 |
11) |
300 |
x2) |
845 x 845 |
200 |
11) |
300 |
x2) |
845x 1040 |
200 |
11) |
300 |
x2) |
1) | Drive on one side is adequate (DD = 1) |
2) | Drive on both sides is necessary (DD = 2 or DD = 3) |
Attachment options for the gear motor
Customer-specific motor
Attachment options for the gear motor
Standard
Drive layout
AS 5/OC drive module (Open Center), division p = 130 mm
AS 5/OC drive module (Open Center), division p = 195 mm; p = 260 mm; p = 325 mm
Division p and drive position DP
p = 130 mm
DP is the roller to which the transmission drive is fitted. This roller is not driven.
Example: DP = 2
Possible drive positions DP with division p
p (mm) |
MA |
DP |
130 |
R; L |
1 ... 31 |
Note:
Only if p = 130 mm: Roller corresponding to DP is not driven.
Gear motor can be mounted on both sides.
Permissible position lDP (mm) from start of section: lDP = DP x p - p/2
Example of p = 130 mm and DP = 10: lDP = 10 x 130 mm - 65 mm = 1235 mm
Division p and drive position DP
p = 195 mm; p = 260 mm; p = 325 mm
DP is the space between two rollers in which the transmission drive is fitted.
Example: DP = 1
Division p and drive position DP
p (mm) |
MA |
DP |
195 |
R; L |
1 ... 20 |
260 |
R; L |
1 ... 15 |
325 |
R; L |
1 ... 11 |
Permissible position lDP (mm) from start of section: lDP = DP x p
Example of p = 260 mm and DP = 5: lDP = 5 x 260 mm = 1300 mm
Note:
Please take account of the load center of gravity when selecting the drive
Connection Kits
Connection Kits
Profile connector Intermediate plate CouplingCAD data
SZ 5/OC Leg Set
SZ 5/OC Leg Set
Leg sets for Open Center sectionsCAD data
Condition of Delivery
Ready-to-install, gear motor enclosed separately |
Mounting option for the gear motor on the right/left possible |