BOSCH REXROTH
R072523000
All Other Products
LBTR wo.Shaft-30-four tracks -100Cr6
BOSCH REXROTH
MATERIAL: R072523000
SUMMARY: LBTR wo.Shaft-30-four tracks -100Cr6
Quantity in stock: 2
Quantity Details:- Hydrotech Stock: 0 can ship April 25, 2024
- Factory Stock: 2 can ship June 27, 2024
General technical data
|
Ø d 1) |
mm |
6 | 8 | 10 | 13 | 16 | 20 | 25 | 30 | 40 | 50 |
|
amax |
m/s² |
150 | |||||||||
|
vmax |
m/s |
3 | |||||||||
|
m |
kg |
0.037 | 0.042 | 0.094 | 0.1 | 0.2 | 0.22 | 0.32 | 0.51 | 1.15 | 2.1 |
|
Operating conditions |
|||||||||||
|
Permissible ambient temperature (min ... max) |
-10 °C ... +80 °C | ||||||||||
| 1) | Actual shaft diameter varies |
Load capacities and load moments
|
Ød 1) |
mm |
6 | 8 | 10 | 13 | 16 | 20 | 25 | 30 | 40 | 50 |
|
C 2) |
N |
970 | 1150 | 2170 | 2120 | 4860 | 6200 | 9800 | 14800 | 24400 | 36600 |
|
C0 2) |
N |
2280 | 2870 | 5070 | 4890 | 11200 | 11300 | 16100 | 23200 | 37500 | 74200 |
|
Mt |
Nm |
1.2 | 1.7 | 3.5 | 16.7 | 48 | 66 | 129 | 229 | 500 | 1100 |
|
Mt0 |
Nm |
2.4 | 3.7 | 8.2 | 39.2 | 110 | 133 | 239 | 412 | 882 | 3180 |
| 1) | Actual shaft diameter varies |
| 2) | The load ratings indicated are minimal values as the load direction cannot always be clearly defined. |
| The load ratings are based on a total travel of 100, 00 m. When based on 50 000 m, the values in the table need to be multiplied by 1.26. |
Legend
|
Symbol |
Description |
Unit |
|
Ød |
Shaft diameters |
mm |
|
amax |
Maximum acceleration travel |
m/s2 |
|
C |
Dynamic load capacity |
N |
|
C0 |
Static load capacity |
N |
|
m |
Mass |
kg |
|
Mt |
Dynamic torsional moment load capacity |
Nm |
|
Mt0 |
Static torsional moment laod capacity |
Nm |
|
vmax |
Maximum permissible speed |
m/s |
Reduced load capacity with short stroke
In case of short stroke, the service life of the shaft is less than that of the torque-resistant Linear Bushing. The dynamic load ratings C in the tables must therefore be multiplied by the factor fs .
| 1) | fs = factor |
| 2) | s = movement path |
Service life, shaft straightness, stabilized installation
Definition of dynamic load ratings
| a) | Concentricity tolerance |
Dimensions
|
Ød 1) |
mm |
6 | 8 | 10 | 13 | 16 | 20 | 25 | 30 | 40 | 50 | |
|
Ød ‒ actual 2) |
mm |
6 | 8 | 10 | 13 | 16 | 18.2 | 23 | 28 | 37.4 | 47 | |
|
D |
h6 |
mm |
14 | 16 | 21 | 24 | 31 | 32 | 37 | 45 | 60 | 75 |
|
D1 |
mm |
30 | 32 | 42 | 43 | 50 | 51 | 60 | 70 | 90 | 113 | |
|
D2 |
mm |
22 | 24 | 32 | 33 | 40 | 47 | 54 | 72 | 91 | ||
|
L |
25 mm -0.2 | 33 mm -0.2 | 36 mm -0.2 | 50 mm -0.2 | 60 mm -0.2 | 70 mm -0.3 | 80 mm -0.3 | 100 mm -0.3 | 112 mm -0.3 | |||
|
L1 |
mm |
5 | 6 | 7 | 9 | 10 | 14 | 16 | ||||
|
L1 |
5 mm | 6 mm | 7 mm | 9 mm | 10 mm | 14 mm | 16 mm | |||||
|
L2 |
mm |
7.5 | 10.5 | 11 | 18 | 23 | 26 | 30 | 36 | 40 | ||
|
O |
mm |
1 | 1.5 | 2 | 3 | 4 | ||||||
|
S 3) |
mm |
3.4 | 4.5 | 5.5 | 6.6 | 9 | 11 | |||||
|
V |
mm |
3.3 | 4.4 | 5.4 | 6.5 | 8.6 | 11 | |||||
| 1) | Actual shaft diameter varies |
| 2) | h7 tolerance |
| 3) | Fixing screws ISO 4762-8.8 |
Recommended housing tolerance: H6 or H7
Installation
Radial clearance: approx. ± 5 μm
Linear bushing and shaft for torque-resistant Linear Bushings with four ball guide grooves come separately. Align the tracks and wiper seals when inserting the shaft and make sure they are not skewed!
General mounting instructions
Initial lubrication
Linear bushings do not come with initial lubrication. Grease the Linear Bushings before use. Service life data is based on initial lubrication and relubricated Linear Bushings.
