BOSCH REXROTH
R151244075
Std.-BSA NU 40x10 SEM-E-C C
BOSCH REXROTH
MATERIAL: R151244075
SUMMARY: Std.-BSA NU 40x10 SEM-E-C C
Quantity in stock: 0
Technical data for nuts
Size |
C |
C0 |
vmax |
Mass |
d0 x P x Dw - i |
N |
N |
m/min |
kg |
16 x 5R x 3 - 4 | 14800 1) | 16100 1) | 30 2) | 0.2 |
16 x 10R x 3 - 3 | 11500 1) | 12300 1) | 60 2) | 0.22 |
16 x 16R x 3 - 3 | 11200 1) | 12000 1) | 96 2) | 0.29 |
20 x 5R x 3 - 4 | 17200 1) | 21500 1) | 30 2) | 0.33 |
20 x 20R x 3,5 - 3 | 16000 1) | 18800 1) | 120 2) | 0.56 |
25 x 5R x 3 - 4 | 19100 1) | 27200 1) | 30 2) | 0.43 |
25 x 10R x 3 - 4 | 18800 1) | 27000 1) | 60 2) | 0.54 |
25 x 25R x 3,5 - 3 | 17600 1) | 23300 1) | 150 2) | 0.77 |
32 x 5R x 3,5 - 4 | 25900 1) | 40000 1) | 23 2) | 0.74 |
32 x 10R x 3,969 - 5 | 38000 1) | 58300 1) | 47 2) | 0.97 |
32 x 20R x 3,969 - 3 | 23600 1) | 33700 1) | 94 2) | 1.04 |
32 x 32R x 3,969 - 3 | 23400 1) | 34000 1) | 150 2) | 1.34 |
40 x 5R x 3,5 - 5 | 34900 1) | 64100 1) | 19 2) | 1.25 |
40 x 10R x 6 - 4 | 60000 1) | 86400 1) | 38 2) | 1.39 |
40 x 12R x 6 - 4 | 59900 1) | 86200 1) | 45 2) | 1.47 |
40 x 20R x 6 - 3 | 45500 1) | 62800 1) | 75 2) | 1.55 |
40 x 40R x 6 - 3 | 44400 1) | 62300 1) | 150 2) | 2.69 |
50 x 5R x 3,5 - 5 | 38400 1) | 81300 1) | 15 2) | 1.67 |
50 x 10R x 6 - 6 | 95600 1) | 166500 1) | 30 2) | 2.46 |
50 x 12R x 6 - 6 | 95500 1) | 166400 1) | 36 2) | 2.69 |
50 x 20R x 6,5 - 5 | 90800 1) | 149700 1) | 60 2) | 3.08 |
50 x 40R x 6,5 - 3 | 55800 1) | 85900 1) | 120 2) | 3.39 |
63 x 10R x 6 - 6 | 106600 1) | 214300 1) | 24 2) | 2.83 |
63 x 20R x 6,5 - 5 | 100700 1) | 190300 1) | 48 2) | 4.86 |
63 x 40R x 6,5 - 3 | 64100 1) | 114100 1) | 95 2) | 5.36 |
80 x 10R x 6,5 - 6 | 130100 1) | 291700 1) | 19 2) | 3.73 |
80 x 20R x 12,7 - 6 | 315200 1) | 534200 1) | 30 2) | 13.5 |
1) | The load ratings are valid for tolerance grades T3 and T5 only. For other tolerance grades, please take into account the correction factor fac (see General Technical Notes and Information "Technical Data", Technical Notes). |
2) | See "characteristic speed d0 • n" (see General Technical Notes and Information "Technical Data" (Technical Notes), and "Critical Speed ncr" (see General Technical Notes and Information, "Project planning notes") |
Operating conditions
Size |
Admissible operating temperature (min ... max) 1) |
Admissible storage temperature (min ... max) |
d0 x P x Dw - i |
||
16 x 5R x 3 - 4 | -10 °C ... +80 °C | -15 °C ... +80 °C |
16 x 10R x 3 - 3 | ||
16 x 16R x 3 - 3 | ||
20 x 5R x 3 - 4 | ||
20 x 20R x 3,5 - 3 | ||
25 x 5R x 3 - 4 | ||
25 x 10R x 3 - 4 | ||
25 x 25R x 3,5 - 3 | ||
32 x 5R x 3,5 - 4 | ||
32 x 10R x 3,969 - 5 | ||
32 x 20R x 3,969 - 3 | ||
32 x 32R x 3,969 - 3 | ||
40 x 5R x 3,5 - 5 | ||
40 x 10R x 6 - 4 | ||
40 x 12R x 6 - 4 | ||
40 x 20R x 6 - 3 | ||
40 x 40R x 6 - 3 | ||
50 x 5R x 3,5 - 5 | ||
50 x 10R x 6 - 6 | ||
50 x 12R x 6 - 6 | ||
50 x 20R x 6,5 - 5 | ||
50 x 40R x 6,5 - 3 | ||
63 x 10R x 6 - 6 | ||
63 x 20R x 6,5 - 5 | ||
63 x 40R x 6,5 - 3 | ||
80 x 10R x 6,5 - 6 | ||
80 x 20R x 12,7 - 6 |
1) | Ball screw assemblies are suitable for continuous operation at temperatures up to 80 °C with temporary peaks of 100 °C (measurements taken on the outer shell of the nut). |
Legend
Symbol |
Description |
Unit |
d0 |
Nominal diameter |
mm |
P |
Lead (R = right-hand) |
|
Dw |
Ball diameter |
mm |
i |
Number of ball track turns |
|
C |
Dynamic load capacity |
N |
C0 |
Static load capacity |
N |
vmax |
Maximum permissible speed |
m/min |
Technical notes
1) | Lube port (lube port machining: Flat surface L3 ≤ 15 mm, countersink L3 > 15 mm) |
2) | Nut rework: Axial lube port |
Dimensions
Size |
D1 min |
D1 max |
d1 |
d2 |
D1 |
D5 |
Hole pattern |
D6 |
D7 |
L |
L3 |
L4 |
L5 |
L8 |
L9 |
L10 |
S 1) |
Sx |
d0 x P x Dw - i |
f9 |
|||||||||||||||||
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
||
16 x 5R x 3 - 4 | 27.94 | 27.975 | 15 | 12.9 | 28 | 48 | BB2 | 38 | 5.5 | 38 | 15 | 10 | 11.5 | 7.1 | 44 | 11.5 | M6 | 4 |
16 x 10R x 3 - 3 | 45 | 15 | 15 | 11 | 15 | |||||||||||||
16 x 16R x 3 - 3 | 27.95 | 27.978 | 61 | 20 | 23 | 10 | 23 | |||||||||||
20 x 5R x 3 - 4 | 35.935 | 35.97 | 19 | 16.9 | 36 | 58 | 47 | 6.6 | 40 | 10 | 12.5 | 7.1 | 51 | 12.5 | ||||
20 x 20R x 3,5 - 3 | 35.945 | 35.973 | 16.7 | 77 | 20 | 25 | 28.5 | 12.5 | 28.5 | |||||||||
25 x 5R x 3 - 4 | 39.935 | 39.97 | 24 | 21.9 | 40 | 62 | 51 | 45 | 10 | 12.5 | 9.5 | 55 | 12.5 | |||||
25 x 10R x 3 - 4 | 64 | 16 | 22 | 10 | 22 | |||||||||||||
25 x 25R x 3,5 - 3 | 39.945 | 39.973 | 21.4 | 95 | 25 | 30 | 35 | 14 | 35 | |||||||||
32 x 5R x 3,5 - 4 | 49.935 | 49.97 | 31 | 28.4 | 50 | 80 | 65 | 9 | 48 | 20 | 10 | 14 | 9.7 | 71 | 14 | |||
32 x 10R x 3,969 - 5 | 27.9 | 77 | 16 | 28.5 | 12.5 | 28.5 | ||||||||||||
32 x 20R x 3,969 - 3 | 49.945 | 49.973 | 84 | 25 | 32 | 32 | ||||||||||||
32 x 32R x 3,969 - 3 | 120 | 40 | 50 | 50 | ||||||||||||||
40 x 5R x 3,5 - 5 | 62.931 | 62.966 | 39 | 36.4 | 63 | 93 | BB1 | 78 | 54 | 25 | 10 | 14.5 | 12 | 81.5 | 14.5 | M8x1 | 5 | |
40 x 10R x 6 - 4 | 38 | 33.8 | 70 | 16 | 22.5 | 11.8 | 22.5 | |||||||||||
40 x 12R x 6 - 4 | 75 | 25 | 25 | 12.5 | 25 | |||||||||||||
40 x 20R x 6 - 3 | 62.941 | 62.969 | 88 | 31.5 | 16.5 | 31.5 | ||||||||||||
40 x 40R x 6 - 3 | 142 | 40 | 45 | 51 | 25 | 51 | ||||||||||||
50 x 5R x 3,5 - 5 | 74.931 | 74.966 | 49 | 46.4 | 75 | 110 | 93 | 11 | 54 | 25 | 10 | 14.5 | 12 | 97.5 | 14.5 | |||
50 x 10R x 6 - 6 | 48 | 43.8 | 90 | 30 | 16 | 30 | 14.1 | 30 | ||||||||||
50 x 12R x 6 - 6 | 105 | 25 | 37.5 | 15 | 37.5 | |||||||||||||
50 x 20R x 6,5 - 5 | 74.941 | 74.969 | 43.4 | 132 | 51 | 20 | 51 | |||||||||||
50 x 40R x 6,5 - 3 | 149 | 45 | 59.5 | 18 | 59.5 | |||||||||||||
63 x 10R x 6 - 6 | 89.926 | 89.961 | 61 | 56.8 | 90 | 125 | 108 | 90 | 16 | 30 | 14 | 110 | 30 | |||||
63 x 20R x 6,5 - 5 | 94.936 | 94.964 | 56.4 | 95 | 135 | 115 | 13.5 | 132 | 25 | 51 | 20 | 117.5 | 51 | |||||
63 x 40R x 6,5 - 3 | 149 | 45 | 59.5 | 18 | 59.5 | |||||||||||||
80 x 10R x 6,5 - 6 | 104.926 | 104.961 | 78 | 73.3 | 105 | 145 | 125 | 95 | 16 | 32.5 | 14 | 127.5 | 32.5 | |||||
80 x 20R x 12,7 - 6 | 124.931 | 124.959 | 76 | 67 | 125 | 165 | 145 | 170 | 50 | 25 | 60 | 24 | 147.5 | 60 |
1) | Lube port machining: Flat surface L3 ≤ 15 mm, countersink L3 > 15 mm |
Legend
Symbol |
Description |
Unit |
d0 |
Nominal diameter |
mm |
P |
Lead (R = right-hand) |
|
Dw |
Ball diameter |
mm |
i |
Number of ball track turns |
Attention: When setting up applications, do not allow components to collide with the front lube unit.
Nut housing MGD
Nut housing MGD
Steel nut housings MGD are designed for FEM-E-C, FDM-E-C, SEM-E-C and FED-E-B nutsCatalog
Service
CAD data
Front lube unit – ball screw assembly
Front lube unit – ball screw assembly
Catalog
Service
Arrestor nut
Arrestor nut
Catalog
Service
Required and supplementary documentation
For further instructions and information, please refer to the documentation for this product.
You can find PDF files of these documents on the Internet at www.boschrexroth.com/mediadirectory.
If you are unsure about using this product, please contact Bosch Rexroth.
Notes