BOSCH REXROTH
Z4WH22E63-5X/
R900501680
Directional Spool Valves
Directional spool valves: Z4W* 22.-5x/
BOSCH REXROTH
MATERIAL: R900501680
SUMMARY: Directional spool valves: Z4W* 22.-5x/
Quantity in stock: 0
01 |
02 |
03 |
04 |
05 |
06 |
07 |
08 |
09 |
10 |
11 |
12 |
13 |
14 |
||
Z4 |
WH |
22 |
– |
5X |
/ |
* |
01 |
Z4 |
|
Type of actuation |
||
02 |
hydraulic |
WH |
03 |
Size 25 |
22 |
Symbols |
||
04 |
see symbols |
|
05 |
Component series 50 ... 59 (50 ... 59: unchanged technical data and pin assignment) |
5X |
06 |
Without manual override |
no code |
07 |
External pilot oil supply, external pilot oil return |
no code |
08 |
Switching time adjustment as supply control |
S |
Switching time adjustment as discharge control |
S2 |
|
Spool position monitoring |
||
09 |
Without position switch |
no code |
Monitored spool position "a" |
QMAG24 |
|
Monitored spool position "b" |
QMBG24 |
|
Monitored spool position "a" and "b" |
QMABG24 |
|
Monitored rest position (not for valve with 2 spool positions) |
QM0G24 |
|
10 |
No additional details |
Without slash |
Additional details |
/ |
|
Stroke setting |
||
11 |
Without stroke setting |
no code |
Stroke setting on side A and B |
10 |
|
Stroke setting on side A |
11 |
|
Stroke setting on side B |
12 |
|
For more information, see stroke setting, mounting options |
||
12 |
Without pressure reducing valve |
no code |
Seal material |
||
13 |
NBR seals |
no code |
FKM seals |
V |
|
Other seals on request |
||
Observe compatibility of seals with hydraulic fluid used. |
||
14 |
Further details in the plain text |
* |
AC voltage mains (admissible voltage tolerance ± 10%) |
Nominal voltage of the DC solenoid in case of operation with alternating voltage |
Ordering code |
110 V - 50/60 Hz 120 V - 60 Hz |
96 V |
G96 |
230 V - 50/60 Hz |
205 V |
G205 |
Preferred types and standard units are contained in the EPS (standard price list).
general
Size |
25 | ||
Weight |
Valve with one solenoid |
kg |
20.8 |
Valve with two solenoids |
kg |
21.1 | |
Valve witch hydraulic actuation |
kg |
20 | |
Switching time adjustment |
kg |
0.8 | |
3-way pressure reducing valve |
kg |
0.4 | |
Plate for version "T" |
kg |
0.5 | |
Installation position |
any | ||
Ambient temperature ranges (NBR seals) |
°C |
-30 … +50 | |
Ambient temperature ranges (FKM seals) |
°C |
-20 … +50 |
hydraulic
Size |
25 | |||
Maximum operating pressure |
Port P |
External pilot oil supply |
bar |
315 |
Internal pilot oil supply (without pressure reducing valve) |
bar |
210 | ||
Internal pilot oil supply (with pressure reducing valve) |
bar |
315 | ||
Anschluss A |
bar |
315 | ||
Port B |
bar |
315 | ||
Port X |
bar |
315 | ||
Port Y |
bar |
315 | ||
Port T |
bar |
315 | ||
Maximum flow |
l/min |
650 | ||
Minimum pilot pressure |
bar |
12 | ||
Maximum pilot pressure |
bar |
210 | ||
Pilot volume for switching process |
cm³ |
7.7 | ||
Hydraulic fluid 1) |
see table | |||
Hydraulic fluid temperature range (NBR seals) |
°C |
-30 … +80 | ||
Hydraulic fluid temperature range (FKM seals) |
°C |
-20 … +80 | ||
Viscosity range |
mm²/s |
2.8 … 500 | ||
Maximum admissible degree of contamination of the hydraulic fluid 2) |
Class 20/18/15 according to ISO 4406 (c) |
1) | The ignition temperature of the process and operating medium used must be over the maximum solenoid surface temperature. |
2) | The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components. For the selection of the filters, see www.boschrexroth.com/filter. |
Hydraulic fluid |
Classification |
Suitable sealing materials |
Standards |
|
Mineral oil |
HL, HLP |
NBR, FKM |
DIN 51524 |
|
Fast bio-degradable hydraulic fluids |
VDMA 24568 |
|||
Environmentally compatible |
Insoluble in water |
HETG |
NBR, FKM |
|
HEES |
FKM |
|||
Soluble in water |
HEPG |
NBR, FKM |
||
Other hydraulic fluids on request |
Notices!
Actuation of the manual override is only possible up to a tank pressure of approx. 50 bar. Avoid damage to the bore of the manual override! (Special tool for the operation, separate order, material no. R900024943). When the manual override is blocked, the actuation of the solenoid must be prevented!
The simultaneous actuation of the solenoids must be prevented!
Switching times (= Contacting at the pilot control valve until start of opening of the control edge in the main valve and change in the pressure value by 5 %)
Inductive position switch type QM: electrical connection
The electric connection is realized via a 4-pole mating connector (separate order) with connection thread M12 x 1.
electrical
Connection voltage (DC voltage) |
V |
24 | ||
Voltage tolerance (connection voltage) |
+30 %/-15 % | |||
Admissible residual ripple |
% |
≤ 10 | ||
Max. load capacity |
mA |
400 | ||
Switching outputs |
PNP transistor outputs, load between switching outputs and GND | |||
Pinout |
1 |
V |
24 | |
2, 4 |
Switching output |
mA |
400 | |
3 |
Earthing (GND) |
V |
0 |
For applications outside these parameters, please consult us!
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qv characteristic curves – Version "E62"
Δp-qv characteristic curves – Version "E63"
E62
E63
➀ |
component side |
➁ |
plate side |
Inductive position switch type QM Switching logics
Version QMA
(Position switch on side B, monitored spool position of the main stage "a")
Version QMA
(Position switch on side B, monitored spool position of the main stage "a")
Version QMB
(Position switch on side A, monitored spool position of the main stage "b")
Version QMB
(Position switch on side A, monitored spool position of the main stage "b")
version QMAB
(Position switch on side A and B, monitored spool position "a" and "b")
Version QM0
(Position switch on side A and B, monitored spool position "0")
1) No signal change at the position switch on side B with spool position "a" | |
2) No signal change at the position switch on side A with spool position "b" |
Version QM0
(Position switch on side B, monitored spool position of the main stage "0")
Version QM0
(Position switch on side A, monitored spool position of the main stage "0")
Dimensions in mm
1 |
Name plate complete valve |
3 |
Main valve➀ component side – Porting pattern according to ISO 4401-08-08-0-05➁ plate side – Porting pattern according to ISO 4401-08-08-0-05 |
6 |
Switching time adjustment (throttle check valve, see data sheet RE 27506); dependent on supply or discharge control installation position (representation: supply control) |
7 |
R-ring plate |
14 |
Identical seal rings for ports A, B, P, and T |
15 |
Pilot oil subplate |
17 |
Locking pin |
Notice!
Length and tightening torque of the valve mounting screws must be calculated according to the components mounted.
Stroke setting, mounting options
The stroke of the main spool is limited by the stroke setting.
The piston stroke is shortened by untightening the lock nut (19) and clockwise rotation of the adjustment spindle (20). For this, the control chamber has to be depressurized.
Stroke 9.5 mm (1 rotation = 1.5 mm stroke)
19 |
Lock nut SW24 |
20 |
Adjustment spindle, internal hexagon SW6 |
Mounting options |
L1 |
L2 |
mm |
mm |
|
Stroke setting on side A and B | 94 | 248 |
Stroke setting on side A | 94 | - |
Stroke setting on side B | - | 248 |
Pilot oil supply
External pilot oil
supply: 8 closed
9 open
internal: 8 open
9 closed
pilot oil port "X" only available with Z4WEH 22 ....
Throttle insert
Use of the throttle insert (10) is necessary if the pilot oil supply in channel P of the pilot control valve is to be limited.
The throttle insert (10) is inserted in channel P of the pilot control valve.
Pilot oil supply
Spool position monitoring
Inductive position switch type QM
Type Z4W.H 16
Dimensions in mm
Mounting cavity R/T-8A; 2 main ports; thread M16 x 1.5 mm
Dimensions in mm
Size |
L1 |
L2 |
mm |
mm |
|
16 | 82 | 182 |
25 | 62 | 215 |
Notice:
The dimensions are nominal dimensions which are subject to tolerances.
Mounting options: |
||||
Monitored spool position |
Ordering code |
Position switch on side |
||
„a“ |
„b“ |
"a" and "b" |
||
„a“ |
QMAG24 |
X |
||
„b“ |
QMBG24 |
X |
||
"a" and "b" |
QMABG24 |
X |
||
„0“ |
QM0G24 |
X |
Mating connectors for valves with connector “K4”, without circuitry, standard
3P Z4
Mating connectors for valves with connector “K4”, without circuitry, standard
3P Z4
For valves with connector “K4” according to EN 175301-803 and ISO 4400, 2-pole + PE, “large cubic connector” Mating connectors for valves with one or two solenoids (individual connection)Data sheet
Spare parts & repair
Mating connectors for valves with connector “K4”, with indicator light
3P Z5L
Mating connectors for valves with connector “K4”, with indicator light
3P Z5L
For valves with connector “K4” according to EN 175301-803 and ISO 4400, 2-pole + PE, “large cubic connector” Mating connectors for valves with one or two solenoids (individual connection)Data sheet
Spare parts & repair
Mating connectors for valves with connector “K4”, with indicator light and Zener diode suppression circuit
3P Z5L1
Mating connectors for valves with connector “K4”, with indicator light and Zener diode suppression circuit
3P Z5L1
For valves with connector “K4” according to EN 175301-803 and ISO 4400, 2-pole + PE, “large cubic connector” Mating connectors for valves with one or two solenoids (individual connection)Data sheet
Spare parts & repair
Mating connectors for valves with connector “K4”, with rectifier
3P RZ5
Mating connectors for valves with connector “K4”, with rectifier
3P RZ5
For valves with connector “K4” according to EN 175301-803 and ISO 4400, 2-pole + PE, “large cubic connector” Mating connectors for valves with one or two solenoids (individual connection)Data sheet
Spare parts & repair