Hydrotech Acquires Isaacs
Hydrotech ecommerce supports the continental US only

BOSCH REXROTH
Z1S6E30-4X/V
R901086018
Check Valves

Check valves: Z1S 6.-4x/

$660.00

BOSCH REXROTH

MATERIAL:  R901086018

SUMMARY:  Check valves: Z1S 6.-4x/

Add to Cart

The valve type Z1S is a direct operated check valve in sandwich plate design.

It is used for the leakage-free blocking in one direction and allows for free flow in the opposite direction.

The stroke of the poppet (1) is limited by the plastic socket (2). The installed spring (3) supports the closing movement. When no fluid flows through the valve, the spring (3) keeps the poppet (1) in closed position.

In contrast to the straight-through valve (section 1), the angle valve (section 2) links or closes off up to three internal channels. Stop and sealing function are taken over by the plug screw (4).

 

Notice:

For all installation positions in which the blue plastic socket (2) is mounted at the plate side ➁, no additional seal ring may be used at this position!

At the component side ➀, the seal ring (5) (as usual) seals the assembly installed downstream.

The installed plastic socket (2) has a sealing function and may not be removed or damaged.

Section 1: Type Z12 6 F (straight-through valve)

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Section 2: Type Z1S 6 B-A (angle valve)

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

01

02

03

04

05

06

07

08

09

10

Z1S

6

4X

/

V

/

*

01

Check valve, Sandwich plate design

Z1S

02

Size 6

6

Direction of flow

03

Straight-through valve (in the channel)

A (A2 → A1)

A

B (B2 → B1)

B

A (A1 → A2)

C

B (B1 → B2)

D

A and B (A1 → A2) and (B1 → B2)

E

P and T (P2 → P1) and (T1 → T2)

F

P (P2 → P1)

P

T (T1 → T2)

T

Angle valve

B → A

B-A

T → P

T-P

AB → P

AB-P

Symbols; for the possible version, see "Symbols/Circuit diagrams"

Cracking pressure

04

0,5 bar

05

1,5 bar

15

3,0 bar

30

5,0 bar

50

05

Component series 40 … 49 (40 … 49: unchanged installation and mounting dimensions)

4X

Seal material

06

FKM seals

V

Observe compatibility of seals with hydraulic fluid used. (Other seals upon request)

Corrosion resistance (outside; thick film passivated according to DIN 50979 Fe//Zn8//Cn//T0)

07

None (valve housing primed)

no code

Improved corrosion protection (240 h salt spray test according to EN ISO 9227)

J3

08

Without locating hole

no code

With locating hole

/601)

With locating hole and locking pin ISO 8752-3x8-St

/62

Special version

09

Standard version

no code

Measuring port in P (G1/4; on channel B side)

SO68

Measuring port in P (G1/4; on channel A side)

SO118

Measuring ports A and B (G1/4)

SO90

Measuring port T (G1/4

SO2

Direction of flow P1 → P2 (opposite to version "P")

SO104

Symbols (examples) see "Symbols/Circuit diagrams"

10

Further details in the plain text

*

1) Locking pin ISO 8752-3x8-St, material no. R900005694 (separate order)

general

Size

6

Weight

kg

0.8

Installation position

any

Ambient temperature range

°C

-20 … +80

For applications outside these parameters, please consult us!

hydraulic

Size

6

Maximum operating pressure

bar

350

Cracking pressure

bar

0.5 / 1.5 / 3 / 5

Maximum flow

l/min

40

Hydraulic fluid

see table

Hydraulic fluid temperature range

°C

-20 … +80

Viscosity range

mm²/s

2.8 … 500

Maximum admissible degree of contamination of the hydraulic fluid, cleanliness class according to ISO 4406 (c) 1)

Class 20/18/15
1) The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components. For the selection of the filters, see www.boschrexroth.com/filter.

Hydraulic fluid

Classification

Suitable sealing materials

Standards

Data sheet

Mineral oils

HL, HLP, HLPD, HVLP, HVLPD

NBR, FKM

DIN 51524

90220

Bio-degradable

Insoluble in water

HETG

NBR, FKM

ISO 15380

90221

HEES

FKM

Soluble in water

HEPG

FKM

ISO 15380

Flame-resistant

Water-free

HFDU

FKM

ISO 12922

90222

HFDR

FKM

Containing water

HFC (Fuchs Hydrotherm 46M, Petrofer Ultra Safe 620)

NBR

ISO 12922

90223

Important information on hydraulic fluids:

For more information and data on the use of other hydraulicfluids, please refer to the data sheets above or contact us. There may be limitations regarding the technical valve data (temperature, pressure range, life cycle, maintenance intervals, etc.). The ignition temperature of the hydraulic fluid used must be 50 K higher than the maximum surface temperature. Flame-resistant - containing water: Maximum pressure differential per control edge 50 bar Pressure pre-loading at the tank port > 20 % of the pressure differential, otherwise increased cavitation Life cycle as compared to operation with mineral oil HL, HLP 50 … 100%. Bio-degradable and flame-resistant – containing water: If this hydraulic fluid is used, small amounts of dissolved zinc may get into the hydraulic system.

(measured with HLP46, ϑOil = 40 ±5 °C)

Straight-through valve

∆p-qV-characteristic curves (A2 → A1)

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Angle valve

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Straight-through valve (➀ = component side, ➁ = plate side)

Version "A"

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Version "D"

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Version "P"

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Version "B"

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Version "E"

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Version "T"

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Version "C"

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Version "F"

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Angle valve (➀ = component side, ➁ = plate side)

Version "AB-P"

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Version "T-P"

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Version "B-A"

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Examples of special versions (➀ = component side, ➁ = plate side)

Version "SO68"

(check valve in channel P, measuring port P Out G1/4)

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Version "SO118"

(check valve in channel P, measuring port P Out G1/4)

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Version "SO90"

(check valve in channel P, measuring port A and B G1/4)

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Version "SO2"

(check valve in channel P, measuring port T G1/4)

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Version "SO104"

(check valve in channel P, direction of flow P1 → P2)

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Straight-through valve

Dimensions in mm

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/
technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Required surface quality of the valve contact surface

Type

B1

B2

H1

H2

mm

mm

mm

mm

Z1S 6 C...SO68 22 - 13.5 -
Z1S 6 P...SO68 - 26.5 - 13
Z1S 6 P...SO118 26.5 - 13 -
Z1S 6 P...SO90 22 22 20 20
Z1S 6 P...SO2 - 17.5 - 20

component side

plate side

1

Name plate

2

Identical seal rings for ports A, B, P, T (plate side)

3

Plastic socket, blue (plate side)

4

Valve mounting bores

5

Porting pattern according to ISO 4401-03-02-0-05

6

Plug screw for measuring port, tightening torque  MA = 30 Nm + 10 %

7

Locking pin ISO 8752-3x8-St (only version "60" and "62")

8

Bore for locking pin (only version "60" and "62")

Valve mounting screws (separate order)

Size

Quantity

Hexagon socket head cap screws

Material number

6

4

ISO 4762 - M5 10.9

-

Notice:

Length and tightening torque of the valve mounting screws must be calculated according to the components mounted under and over the sandwich plate valve.

Angle valve

Dimensions in mm

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/
technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Required surface quality of the valve contact surface

Type

B3

mm

Z1S 6 AB-P 24.5
Z1S 6 T-P 24.5
Z1S 6 B-A 22

1

Name plate

2

Identical seal rings for ports A, B, P, T (plate side)

3

Plastic socket, blue (plate side)

4

Valve mounting bores

5

Porting pattern according to ISO 4401-03-02-0-05

7

Locking pin ISO 8752-3x8-St (only version "60" and "62")

8

Bore for locking pin (only version "60" and "62")

9

Plug screw, tightening torque MA = 55 Nm + 10 %

component side

plate side

Valve mounting screws (separate order)

Size

Quantity

Hexagon socket head cap screws

Material number

6

4

ISO 4762 - M5 10.9

-

Notice:

Length and tightening torque of the valve mounting screws must be calculated according to the components mounted under and over the sandwich plate valve.

Check valve installation set: Disassembly and assembly

technical illustration-Z1S6E30-4X/V-Check valves: Z1S  6.-4x/

Disassembly/assembly without causing damage is achieved by using the special multi-purpose tool (1) (separate order, material no. R901182853).

 

Disassembly:

Push out the check valve installation set.

 

Assembly:

Insert the check valve installation set and push in the plastic socket (2).

With correct assembly using the special multi-purpose tool (1), the protrusion of the plastic socket (2) is approx. 0.3 mm.

 

Notice:

Once removed, plastic sockets may no not be used again.

 

Notes

Valve housing (steel) and plastic spool with plastic socket can be disassembled into individual components for proper disposal. The check valve installation set is available separately (plastic socket, plastic spool, spring): E-Mail: spare.parts@boschrexroth.de The plastic socket has a sealing function and may therefore not be damaged. For installation and disassembly of the check valve installation set, a special multi-purpose tool is required, see "Mounting".

Troubleshooting

External leakage at the flow passages

Seal ring faulty.

Replace seal rings (seal kit).

Lip of the plastic socket is damaged.

Replace check valve installation set.

1)

Mounting screws tightened unevenly.

Loosen screws and tighten them again crosswise using the recommended tightening torque.

Internal leakage at the check valve installation set

Foreign particle on poppet surface.

Check poppet surface from the outside for foreign particles and remove them.

Poppet does not move freely.

Check free movement of the poppet from the outside using an appropriate mandrel.

Caution - do not push the plastic socket out of the housing!

Leakage caused by downstream assembly.

Check if the check valve installation set is the reason for the leakage.

Hydraulic fluid quality does not correspond to the specification.

Check hydraulic fluid quality and adjust it to the specifications, if required.

Dependent on the included hydraulic fluid volume and its temperature variations, there may be pressure changes which are not due to leakage.

If the measures described above are not successful.

Completely replace the check valve installation set.

1)

External leakage at measuring points

Seal faulty.

Replace profile seal.

Plug screw or fitting not tightened correctly.

Tighten plug screw or fitting using the specified tightening torque.

1) Use the special multi-purpose tool to avoid damaging the plastic socket, see "Mounting".