Hydrotech Acquires Isaacs
Hydrotech ecommerce supports the continental US only

BOSCH REXROTH
RKG0057/005,0(RGS1711-REG0011-RGS1712)
R911342693
All Other Products

Encoder cable ready-made: RGG

$740.99

BOSCH REXROTH

MATERIAL:  R911342693

SUMMARY:  Encoder cable ready-made: RGG

Quantity in stock: 1

Quantity Details:
  • Hydrotech Stock: 0 can ship March 28, 2024
  • Factory Stock: 1 can ship June 13, 2024
Add to Cart

Data for encoder cables REG0011

RoHS

compliant with EU directive 2002/95/EC

AWM Style (UL)

20233

Diameter, cable

10 mm ±0.3

Cable sheath material

PUR

Cable sheath color

RAL 2003 (orange)

Specific cable weight

0.027 kg/m

Oil resistance

EN 60811-2-1 and EN 50363-10-2

Burning behavior

UL 758, section 40, Cable Flame Test Section 1061 as per UL 1581 and CSA C22.2 No. 210-05 Sec. 8.8.2. Test according to DIN EN 60332-1-2

Bending cycles

5 million

Bending radius for flexing installation

75 mm

Bending radius for fixed installation

40 mm

For more information on connectors and cables, see the documentation "Rexroth connection cable IndraDrive and IndraDyn" DOK-CONNEC-CABLE*INDRV-CA03-DE-P, R911322948 de-DE, 24.04.2013.

 

Cable for DRIVE-CLiQ

For IMS with the interface option "DQ" (DRIVE-CLiQ), we recommend MOTION-CONNECT DRIVE-CLiQ-lines with M12-connector for direct measuring systems from the Siemens accessories range.

 

Cable for FANUC αi

For IMS with the interface option “FN” (FANUC) we recommend the FANUC cable: LX660-4077-T321

Other cable lengths on request

For further technical data/cable description see the IMS R320103262 instructions

Cable lengths

Part number

Length

m

R911344382 0.5
R911342692 2
R911341134 3
R911342693 5
R911342694 8
R911369771 10
R911341135 15
R911341136 20

Maximum cable length IMS-I

For connection to Rexroth drive controller IndraDrive:

Encoder interface EC (12 VDC supply): maximum length is 75 m

Encoder interface EN2 interface (5 VDC supply): maximum length is 50 m

For connection to other evaluation electronics:

Signal type I1 (1 Vpp, current consumption 300 mA):

Voltage drop over 75 m cable length is 2.05 V, i.e., the encoder supply voltage for the evaluation electronics must be able to be set to at least 6.8 V (for example, by sense-control).

Signal type I2, I3, I4 (TTL, current consumption 350 mA):

Voltage drop over 75 m cable length is 2.30 V, that is, the encoder supply voltage for the evaluation electronics must be able to be set to at least 7.05 V (for example, by sense-control).

 

Maximal cable length for IMS-A

Interfaces

Length (m)

Clock rate (MHz)

HF

75

-

SSI

10

2

48

1

74

0,75

DQ

in accordance with Siemens specification

FN

48m (when using the FANUC cable LX660-4077-T321)

Please note that the cable length can additionally be limited by:

Plug-and-socket connections (> two pieces)
EMC behavior

Be sure to take note of the information in the project planning instructions for IndraDrive drive control units and the EMC project planning. The overall length of the pre-assembled cables is measured inclusive of the connectors.

technical illustration-RKG0057/005,0(RGS1711-REG0011-RGS1712)-Encoder cable ready-made: RGG