Hydrotech Acquires Isaacs
Hydrotech ecommerce supports the continental US only

SUN HYDRAULICS CORP
X6DNLANHA506
Circuit Savers

Y-assembly

SUN HYDRAULICS CORP

MATERIAL:  X6DNLANHA506

SUMMARY:  Y-assembly

Due to extremely high demand, please call 888-651-5712 for availability

This assembly consists of a needle valve which is a fully-adjustable orifice used to regulate flow. It is infinitely adjustable from fully closed up to the maximum orifice diameter. It is not pressure-compensated. It may be used as flow controls or as shutoff valves. The rapid or feed rate is selected by a solenoid operated (normally open or closed) 2-way, 2-position valve.


Capacity12 gpm (.25 inch)45 L/min. (6,4 mm)
Body TypeSandwichSandwich
InterfaceISO 05ISO 05
Body FeaturesMeter in on A or meter out on BMeter in on A or meter out on B
Stack Height2.99 in.76 mm
Seal Plate Included (see notes)YesYes

Show FAQ

Additional Resources



Notes:
  • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.